Wireless Transciever HELP!

Projects Networking, Protocols, and Devices
1

I just found this wireless transceiver and I was wondering if it was possible to utilize this in an R/C car project I have been working on. Unfortunately, I don't have much experience with electronics or Arduino so I need some help on how to hook this up to run the R/C car. I have only basic knowledge of serial communication between computer and Arduino so any help in identifying the pins and their functions, as well as anything else would be much appreciated. :slight_smile:

The first two pictures are of the receiver and the third is of the transmitter.

IMG_4654.JPG
IMG_4654.JPG1724×1412 563 KB

IMG_4655.JPG
IMG_4655.JPG1812×1500 653 KB

IMG_4653.JPG
IMG_4653.JPG1482×1850 771 KB

2

Because of the "L G R" (Left, Ground, Right) connectors I would guess these are for wireless stereo speakers.

Try hooking 5V to the Vcc and Ground pins.

3

This is from a wireless stereo system. But feeding voltage through it would only turn it on right? How would I setup a serial communication with my computer and the receiver/transmitter? Thanks