with IDE 1.8.14 hourly build NodeMCU not connecting to local router

with the hourly build of 2021/01/27 07.33 my NodeMCU does not connect anymore to my local router. this text is printed: reconnect state: 2 -> 0 (0) scandone state: 0 -> 2 (b0) state: 2 -> 3 (0) state: 3 -> 5 (10) add 0 aid 1 cnt .

never seen this before. example WifiScan shows the router. the NodeMCU is also able to connect to the router of my internet provider.

help to solve this is very much appreciated.

rolf meesters

Don't use the hourly build! Use the full release 1.8.13

@missdrew i still have 1.8.13 available, but also with that version it doesn't work anymore.

(btw i went to the hourly build because with the UNO Wifi rev2 the wifi drops out regularly, and i read a post which suggested that this build could solve this problem. well, it didn't and i got a new problem as bonus).

rolf

Ah, I don't have an answer to help, sorry.

rolfmeesters: i still have 1.8.13 available, but also with that version it doesn't work anymore.

It sounds as if you used to have a version that worked - what version was that?

...R

sorry, for the noise, i was a bit panicking because of a deadline.
it appeared to be a password, changed in the local router but not updated in the sketch.

rolf