# XBee chips won't respond

**URL:** <https://forum.arduino.cc/t/xbee-chips-wont-respond/18796>\
**Category:** Interfacing\
**Created:** [July 20, 2010, 8:21pm UTC](https://forum.arduino.cc/t/xbee-chips-wont-respond/18796 "2010-07-20T20:21:37Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/system/32/1140315_2.png) [@system](https://forum.arduino.cc/u/system)\
**Post date:** [July 20, 2010, 8:21pm UTC](https://forum.arduino.cc/t/xbee-chips-wont-respond/18796/1 "2010-07-20T20:21:37Z")

</div>

hello all,  
i have bought 2 xbee pro 2 chips from sparkfun. i have also bought the xbee shields for duemilanove. i want to establish simple wireless communication between the xbee chips. i have tried X-CTU but it cannot identify the firmware version or specs of the chips. i have also trie the straighter approach of Serial.print commands from Arduino IDE but no luck at all... ☹  
Chip ID:

> **[XBee Pro 50mW Series 2.5 Wire Antenna - WRL-08876 - SparkFun Electronics](https://www.sparkfun.com/products/retired/8876)**
>
> \*\*Replacement:\*\*\[WRL-10421\](http://www.sparkfun.com/products/10421). This new version is a Series 2 which uses a much newer firmware. It is compatible with

Shield ID:

> **[SparkFun XBee Shield - WRL-12847 - SparkFun Electronics](https://www.sparkfun.com/products/12847)**
>
> XBee radios are an awesome way to add wireless capability to your Arduino project and now it's even easier with the SparkFun XBee Shield. The shield form-f

plz help about what i should do. project deadline approaching. :((

---

<div class="post-metadata">

**Author:** ![system](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/system/32/1140315_2.png) [@system](https://forum.arduino.cc/u/system)\
**Post date:** [July 20, 2010, 8:36pm UTC](https://forum.arduino.cc/t/xbee-chips-wont-respond/18796/2 "2010-07-20T20:36:00Z")

</div>

> i have tried X-CTU but it cannot identify the firmware version or specs of the chips.

Why not? What goes wrong?

Are you trying to get bi-directional communication between the 2 XBees? If so, I think that you bought the wrong kind. For this, you need the Series 1 models.

> i have also trie the straighter approach of Serial.print commands from Arduino IDE but no luck at all

You need to get the XBees configured and talking to each other, first.

---

<div class="post-metadata">

**Author:** ![system](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/system/32/1140315_2.png) [@system](https://forum.arduino.cc/u/system)\
**Post date:** [May 6, 2021, 7:13pm UTC](https://forum.arduino.cc/t/xbee-chips-wont-respond/18796/3 "2021-05-06T19:13:59Z")

</div>

Closed on May 6, 2021, 7:13pm UTC


