xbee direct connection via seeduino stalker

Hi, I recently bought Stalker board and tried to connect to xbee that I plugged into it via X-CTU This code was uploaded to a board before:

void setup() { * DDRB=0;* * DDRC=0;* * DDRD=0;* } void loop() { *} *

Terminal cannot communicate with the module (tried Cool term and X-CTU) but the data is uploaded to the board for ex blink sketch, so it is definetely not a usb-ttl drawback. The module (xbee) also works correctly (tested it on another adopter) Has anyone see this problem? Will appreciate your reply.