# XBee interfacing problem

**URL:** <https://forum.arduino.cc/t/xbee-interfacing-problem/18809>\
**Category:** Interfacing\
**Created:** [July 21, 2010, 3:36pm UTC](https://forum.arduino.cc/t/xbee-interfacing-problem/18809 "2010-07-21T15:36:49Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/system/32/1140315_2.png) [@system](https://forum.arduino.cc/u/system)\
**Post date:** [July 21, 2010, 3:36pm UTC](https://forum.arduino.cc/t/xbee-interfacing-problem/18809/1 "2010-07-21T15:36:49Z")

</div>

hello all,  
i have bought 2 xbee pro 2 chips from sparkfun. i have also bought the xbee shields for duemilanove. i want to establish simple wireless communication between the xbee chips. i have tried X-CTU but it cannot identify the firmware version or specs of the chips. i have also trie the straighter approach of Serial.print commands from Arduino IDE but no luck at all...  
Chip ID:

> **[XBee Pro 50mW Series 2.5 Wire Antenna - WRL-08876 - SparkFun Electronics](https://www.sparkfun.com/products/retired/8876)**
>
> \*\*Replacement:\*\*\[WRL-10421\](http://www.sparkfun.com/products/10421). This new version is a Series 2 which uses a much newer firmware. It is compatible with

Shield ID:

> **[SparkFun XBee Shield - WRL-12847 - SparkFun Electronics](https://www.sparkfun.com/products/12847)**
>
> XBee radios are an awesome way to add wireless capability to your Arduino project and now it's even easier with the SparkFun XBee Shield. The shield form-f

I m not able to detect the firmware of my XBee chips with XCTU and also not able to perform 'READ' operation in XCTU for the chip. ☹ plz help.

---

<div class="post-metadata">

**Author:** ![caseygross](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/caseygross/32/213837_2.png) [@caseygross](https://forum.arduino.cc/u/caseygross)\
**Post date:** [July 21, 2010, 4:09pm UTC](https://forum.arduino.cc/t/xbee-interfacing-problem/18809/2 "2010-07-21T16:09:01Z")

</div>

When youre starting communication with the xbees on xctu did you select the correct baud rate?

---

<div class="post-metadata">

**Author:** ![system](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/system/32/1140315_2.png) [@system](https://forum.arduino.cc/u/system)\
**Post date:** [May 6, 2021, 7:14pm UTC](https://forum.arduino.cc/t/xbee-interfacing-problem/18809/3 "2021-05-06T19:14:02Z")

</div>

Closed on May 6, 2021, 7:14pm UTC


