xbee y arduino

Hello,
I have a problem in receiving the data from an end device sensor to the coordinator, I send them an image so that it can be better understood

7E,0,12,92,0,13,A2,0,41,5,84,D2,FF,FE,C1,1,0,17,0,0,17,2F,
7E,0,12,92,0,13,A2,0,41,5,84,D2,FF,FE,C1,1,0,17,0,0,17,2F,
7E,0,12,92,0,13,A2,0,41,5,84,D2,FF,FE,C1,1,0,17,0,0,17,2F,
7E,0,12,92,0,13,A2,0,41,5,84,D2,FF,FE,C1,1,0,17,0,0,17,2F,
7E,0,12,92,0,13,A2,0,41,5,84,D2,FF,FE,C1,1,0,17,0,0,17,2F,
7E,0,12,92,0,13,A2,0,41,5,84,D2,FF,FE,C1,1,17,0,7E,13,41,84,
FE,0,0,2F,12,0,0,5,FF,1,0,2F,12,0,A2,5,D2,FE,0,2F,12,0,
0,84,FF,1,0,17,0,92,A2,5,FF,C1,17,0,2F,12,0,A2,5,C1,17,0,
7E,92,13,41,D2,FE,0,0,2F,12,13,41,D2,FE,0,0,2F,12,13,84,FE,1,
17,17,0,92,13,0,84,FF,C1,17,17,7E,92,13,41,D2,FE,0,0,0,92,A2,
5,D2,FE,0,0,2F,12,0,0,84,FE,1,0,2F,0,0,A2,5,FF,0,0,7E,
92,A2,5,FF,FE,1,0,2F,12,13,41,D2,FE,1,0,2F,12,13,41,FF,1,0,
17,0,0,A2,5,FF,1,0,2F,12,13,41,D2,C1,17,0,2F,0,0,5,D2,C1,
17,0,2F,12,13,0,5,FF,1,17,0,7E,12,0,0,5,FF,C1,0,2F,12,13,
0,84,FE,1,17,17,0,0,0,5,FF,C1,0,0,7E,92,A2,5,D2,1,0,17,
7E,92,13,41,84,FF,1,0,2F,12,13,41,D2,FE,0,0,17,7E,92,41,D2,FE,
0,0,7E,12,0,0,5,FF,C1,17,17,7E,12,0,0,84,FF,1,0,0,92,A2,
5,D2,C1,17,0,2F,7E,0,12,92,0,13,A2,0,41,5,84,D2,FF,FE,C1,1,
0,17,0,0,17,2F,7E,0,12,92,0,13,A2,0,41,5,84,D2,FF,FE,C1,1,
0,17,0,0,17,2F,7E,0,12,92,0,13,A2,0,41,5,84,D2,FF,FE,C1,1,
0,17,0,0,17,2F,7E,0,12,92,0,13,A2,0,41,5,84,D2,FF,FE,C1,1,
0,17,0,0,17,2F,7E,0,12,92,0,13,A2,0,41,5,84,D2,FF,FE,C1,1,
0,17,0,0,17,2F,7E,0,12,92,0,13,A2,0,41,5,84,D2,FF,FE,C1,1,
0,17,0,0,17,2F,7E,0,12,92,0,13,A2,0,41,5,84,D2,FF,FE,C1,1,
0,17,0,0,17,2F,7E,0,12,92,0,13,A2,0,41,5,84,D2,FF,FE,C1,1,
0,17,0,0,17,2F,7E,0,12,92,0,13,A2,0,41,5,84,D2,FF,FE,C1,1,
0,17,0,0,17,2F,7E,0,12,92,0,13,A2,0,41,5,84,D2,FF,FE,C1,1,
0,17,0,0,17,2F,7E,0,12,92,0,13,A2,0,41,5,84,D2,FF,FE,C1,1,
0,17,0,0,17,2F,7E,0,12,92,0,13,A2,0,41,5,84,D2,FF,FE,C1,1,
0,17,0,0,17,2F,7E,0,12,92,0,13,A2,0,41,5,84,D2,FF,FE,C1,1,

I'm using 2 xbee s3b pro end device and coordinator arduino one

What is the problem?

Please start here