Hi All,
i bought a dozen of the E303 Huawei dongles which i managed to get online in my
testversion. Now i see that the product ID is different then the dongle i had to test with
The first one had 12d1:1f01 , but the ones i have now use 12d1:1442 .
I tried to add that to the usb_modeswitch.d to switch it:
#Huawei E303
DefaultVendor= 0x12d1
DefaultProduct= 0x1442
TargetVendor= 0x12d1
RargetProduct= 0x1442
MessageEndPoint = "0x01"
MessageContent="55534243000000000000000000000011060000000000000000000000000000"
NoDriverLoading=1
also tried the defaultproduct and/or targetproduct to 1f01 , as it worked with the first dongle,
no luck; I keep gettings switching errors and when i do lsusb it shows the normal huawei device
and not the modem. grrrrr
is there ANY way to determine the correct settings for a good switch ? Information is very
poort about it.
thanx in advance !