Arduino due No device found on COM3

Official Hardware Mega Due
1

i am new for arduino. i try to upload code but i found this error

Sketch uses 10644 bytes (2%) of program storage space. Maximum is 524288 bytes.
Forcing reset using 1200bps open/close on port COM3
C:\Users\Admin\AppData\Local\Arduino15\packages\arduino\tools\bossac\1.6.1-arduino/bossac.exe -i -d --port=COM3 -U false -e -w -v -b C:\Users\Admin\AppData\Local\Temp\arduino_build_588610/sketch_aug23a.ino.bin -R 
Send auto-baud
No device found on COM3
Set binary mode
An error occurred while uploading the sketch

1406×739 56.7 KB

i check my com3 is connected.

i select board and port like this.

before show error "No device found on COM3" i found RX light is blink.

2

What happens if you do this:

  • Connect the USB cable to the "Native USB port" on the Due
  • Select Tools > Board > Arduino SAM Boards ... > Arduino Due (Native USB port)
  • Select the Due's port from the Tools > Port menu
  • Sketch > Upload
3

Thank for your reply

i connect the USB cable to the "Native USB port" on the Due but in device manager not detected

and i can not select port

759×681 46.3 KB