Arduino Nano FTDI Program Error

Argh, after trying all available FTDI Driver it still would not upload. I also tried flashing the FTDI programmer using Mprog but still couldn't work. Anyone has some solution. I Tried the 2.12.28 driver and also 2.8.28 none of them would let me upload. This stupid nano clones makes me crazy

using the blink sketch lmao

Arduino: 1.8.19 (Windows 10), Board: "Arduino Nano, ATmega328P (Old Bootloader)"

Sketch uses 924 bytes (3%) of program storage space. Maximum is 30720 bytes.

Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x9c

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x9c

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x9c

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x9c

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x9c

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x9c

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x9c

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x9c

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x9c

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x9c

Problem uploading to board. See https://support.arduino.cc/hc/en-us/sections/360003198300 for suggestions.

This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.

da driver that I use

Does your NANO actualy have an FTDI chip?

Please post a close, in focus, well lit photo of BOTH sides of your NANO please.

Hello guys im very thankful for all of the responses. Now my problem is fixed.
For nano FTDI user, never update your FTDI driver. If you accidentally do and it got bricked.
please visit this really great site

Fixing the FTDI drivers – prevent auto updates – ReiLabs (rei-labs.net)

Again thanks for the response, and I think Bill Gates and FTDI are working together to brick cloned controller.

This topic was automatically closed 180 days after the last reply. New replies are no longer allowed.