Arduino UNO Q via IDE - No Serial Monitor Output

[KurtE]

I believe that @ptillisch answered similar question asked by @Merlin513 in the thread:

What Works using just IDE 2 and the stm32?

Hi @Merlin513. The Serial object is not for use in communicating via the USB CDC serial port of the UNO Q. It is instead used for communication via the UART: https://docs.arduino.cc/tutorials/uno-q/user-manual/#uart So you should see the expected results if you connect a USB to UART adapter module to pins 0 and 1 on the board, but you will not see it if you open the board's native serial port in Serial Monitor. There is an alternative approach using the Monitor object instead of Serial, as do…