If there is anything connected to the Uno, disconnect it (buttons, LEDs etc.) and try again.
If nothing else is connected to the Uno and it fails to upload, I think that the bad news is that your Arduino is dead; I can't tell you why.
You might be able to eliminate some components.
- Check the 5V and 3.3V output with a multimeter; they should be close to those values.
- If you press and release the reset button, do you get 3 quick flashes of the L-LED after releasing the reset button? If not, the bootloader in the 328P is no longer functioning correctly.
- After removing the 328P chip, run Loop-Back Test Instructions. If it passes the test the 16U2 is OK.