I need to change this A S1 button into 6x6mm small button as shown in photo. All the codes are written and worked well with A S1 button. The problem is I cannot find any tutorials for using 6x6 mm button, and literally don't know how to solder and connect with wires. I asked AI and it said solder it diagonally, but A S1 has three pins (Pin Signal, 5V and GND) but 6x6 mm only has two, so how can it be used? If there is some tutorials or previous projects that I can see, can you share it please? Thanks a lot for help. [f8cf3001ce58dd07c2e173375c95ce14] [14acf51d5a78a5486a1a34a65c227292]

[a03fcaf577b35ffcff10fe5017ac0f9b] Thanks for everyone whoever replying and helping me. It solved. I soldered it diagonally (I know it's a bit ugly), one connecting to the Pin and the other to the GND. It worked the same way as A S1 button, without having any problems. From here, thanks again to everyone helping me.

[image] jim-p: Where? Where do they appear?

Asking help for button

Other Hardware General Electronics

GolamMostafa April 19, 2026, 11:34am 21

Where do they appear?

Topic		Replies	Views
How would I connect this button to an arduino nano every General Electronics	77	1287	July 14, 2026
Button Matrix Help General Guidance	20	490	May 17, 2026
Push Button LED Control experiment questions? General Guidance	7	189	June 12, 2026
Pullup/Pulldown guidance on pushbutton General Electronics	49	953	August 3, 2024
Button pressed when not pressed. (Code Bug) General Guidance	27	624	March 8, 2026

Asking help for button

Related topics