Compilation error: exit status 1

[ptillisch]

@rainerwh

Wie man das selber in der eigenen Installation korrigieren kann weiß ich allerdings auch nicht. Der Austausch der fehlerhaften Komponente "platform.txt" reicht bei mir nicht aus. Tipps willkommen.

Eine Anleitung gebe ich hier:

Compiling for ESP32 fails: "Access is denied."

OK, here you go: Use Arduino IDE Boards Manager to install version 2.0.10 of the esp32 boards platform if you already rolled back to a previous version. Select File > New Sketch from the Arduino IDE menus. Select any ESP32 board from the Arduino IDE Tools > Board menu. Select Sketch > Verify/Compile from the Arduino IDE menus. Wait for the compilation to finish. Scroll the black output panel at the bottom of the Arduino IDE window all the way up to the top. Look for the line that starts with…

Alternative Anleitung hier:

Error compiling

Hi @robsedua. The bug that caused this "Acesso negado." / "Access is denied" error has been identified and fixed: That fix will be in the next release of the "esp32" boards platform. Arduino IDE will notify you once that release is available. Since the regression was introduced in the 2.0.10 release of the "esp32" boards platform, the simple workaround is to roll back to the last good version. I'll provide instructions you can follow to do that: Select Tools > Board > Boards Manager from t…