Debugging Due on Atmel Studio 7 using Atmel-ICE and JTAG

Hi all,

I was able to program my Uno using an Atmel-ICE and Atmel Studio. Thought I would try the same with my Due. Now I can't figure out how to get it to work.

I followed the same basic steps as this tutorial but selected JTAG in the debug tool tag. I powered up the board, plugged the connector in and pressed debug. I got a list of errors that I don't even know where to start with. Has anybody done this before and can lend a hand, I can't seem to find any good information anywhere?

Error list

Severity	Code	Description	Project	File	Line
Error		recipe for target 'src/core/cortex_handlers.o' failed	ArduinoCore	c:\users\brad's pc\Documents\Atmel Studio\7.0\ArduinoSketch1\ArduinoSketch1\ArduinoCore\Debug\Makefile	261
Error		recipe for target 'src/core/IPAddress.o' failed	ArduinoCore	c:\users\brad's pc\Documents\Atmel Studio\7.0\ArduinoSketch1\ArduinoSketch1\ArduinoCore\Debug\Makefile	282
Error		recipe for target 'src/core/main.o' failed	ArduinoCore	c:\users\brad's pc\Documents\Atmel Studio\7.0\ArduinoSketch1\ArduinoSketch1\ArduinoCore\Debug\Makefile	296
Error		recipe for target 'src/core/Print.o' failed	ArduinoCore	c:\users\brad's pc\Documents\Atmel Studio\7.0\ArduinoSketch1\ArduinoSketch1\ArduinoCore\Debug\Makefile	310
Error		chip.h: No such file or directory	ArduinoCore	c:\users\brad's pc\Documents\Atmel Studio\7.0\ArduinoSketch1\ArduinoSketch1\ArduinoCore\include\core\Arduino.h	42
Error		chip.h: No such file or directory	ArduinoCore	c:\users\brad's pc\Documents\Atmel Studio\7.0\ArduinoSketch1\ArduinoSketch1\ArduinoCore\include\core\Arduino.h	42
Error		chip.h: No such file or directory	ArduinoCore	c:\users\brad's pc\Documents\Atmel Studio\7.0\ArduinoSketch1\ArduinoSketch1\ArduinoCore\include\core\Arduino.h	42
Error		chip.h: No such file or directory	ArduinoCore	c:\users\brad's pc\Documents\Atmel Studio\7.0\ArduinoSketch1\ArduinoSketch1\ArduinoCore\include\core\Arduino.h	42
Error		chip.h: No such file or directory	Blink	c:\users\brad's pc\Documents\Atmel Studio\7.0\ArduinoSketch1\ArduinoSketch1\ArduinoCore\include\core\Arduino.h	42
Error		recipe for target 'Sketch.o' failed	Blink	c:\users\brad's pc\Documents\Atmel Studio\7.0\ArduinoSketch1\ArduinoSketch1\Blink\Debug\Makefile	81

Did you see that thread ?

and this :

Yes I did, the first one specifies what cable to use but doesn't go into much detail. The tutorials from the links in it show how to get AVR's working, but I've already got that working.

Copperhilltech was the first source I looked at. They basically say it is possible but don't give any real steps. The tutorials in the links on their page seem to go through different ways of accomplishing the same thing. I'm quite confused with which is the correct way to go especially since some of them only show ways of flashing to the chip and no debugging. On chip debugging is the reason I am trying to use Atmel Studio in the first place.

What I am looking for is a procedure similar to the one used for the Uno, where I import an arduino sketch, Atmel studio formats it to it's standard, and I can select the debugger I want to use. Does this procedure exist and if so how is it done?

Maybe this:

https://digistump.com/board/index.php?topic=1275.0