Hi all,
as title, when I start "Debug" session using debug button I've this error:
GDB executable "C:\Users\myname\AppData\Local\Arduino15\packages\esp32\tools\xtensa-esp-elf-gdb\11.2_20220823\bin\arm-none-eabi-gdb.exe" was not found. Please configure "cortex-debug.armToolchainPath" or "cortex-debug.gdbPath" correctly.
I've tried this Tutorial but nothing, same error:
Any advice?
After some test I've found that now I've this type of error:
[2023-12-28T15:29:43.223Z] SERVER CONSOLE DEBUG: onBackendConnect: gdb-server session connected. You can switch to "DEBUG CONSOLE" to see GDB interactions.
"C:\Users\myname\AppData\Local\Arduino15\packages\esp32\tools\openocd-esp32\v0.11.0-esp32-20221026/bin/openocd" -c "gdb_port 50000" -c "tcl_port 50001" -c "telnet_port 50002" -s "c:\Users\myname\OneDrive\2. PC - Notebook\Documenti\Arduino\libraries\EPD_Driver\examples\Demo_271" -f "C:/Users/myname/AppData/Local/Programs/Arduino IDE/resources/app/plugins/cortex-debug/extension/support/openocd-helpers.tcl" -f debug.cfg
Open On-Chip Debugger v0.11.0-esp32-20221026 (2022-10-26-14:48)
Licensed under GNU GPL v2
For bug reports, read
OpenOCD: Bug Reporting
CDRTOSConfigure
Info : only one transport option; autoselect 'jtag'
Info : esp_usb_jtag: VID set to 0x303a and PID to 0x1001
Info : esp_usb_jtag: capabilities descriptor set to 0x2000
Warn : Transport "jtag" was already selected
Info : Listening on port 50001 for tcl connections
Info : Listening on port 50002 for telnet connections
Error: esp_usb_jtag: could not find or open device!
[2023-12-28T15:29:43.294Z] SERVER CONSOLE DEBUG: onBackendConnect: gdb-server session closed
GDB server session ended. This terminal will be reused, waiting for next session to start...
This topic was automatically closed 180 days after the last reply. New replies are no longer allowed.