Grove analog sound sensor

I Made an SPL meter (with a SparkFun microphone board). There are lots of comments in the code and other notes in the post so hopefully you can understand how it works.

There are several "complications" that make it very difficult to make a "good" SPL meter but depending on what you need it may be "usable". The main thing is calibration. The voltage you get depends on microphone sensitivity and preamp gain. In general, you need a known-good SPL meter to calibrate the one you're building.

You can get an SPL meter app for your phone but phone-microphone sensitivity varies too. If you have an iPhone I assume they are more consistent than a "random" Android but it still may not be as accurate as a real SPL meter..