happy time fun stuff For Sale!

Community Bar Sport
1

Sometimes in the fast paced world of architecture school, cnc building, wearable electronicking, and trying to move lots of things with motors, you buy too much stuff, and then you run out of money.... so for your purchasing pleasure:

******UPDATED LIST AS OF 5/17/11

openlog data logger with 1 microsd flash card: 18
Protoshield assembled: 5
ultrasonic range finder: Ultrasonic Range Finder - LV-MaxSonar-EZ2 - SEN-08503 - SparkFun Electronics totally unused, still sealed: 18

2 LED bar graphs unusued: 1 dollar each

GPS http://www.sparkfun.com/products/8975 totally unused: 45

Any volt micro voltage regulator: 5
10 vibration motors from polulu, some sealed some used, all of them for 7.
1 trial size kit of smooth-on 0030 ecoflex silicne rubber, unopened 10
1 gallon size kit of smooth-on RIGID 8 casting foam - 15 unopened
2 anahiem automation steppers 4 wire bipolar 66ozin 8 each (interar)
2 pk-266 2amp bipolar 166oz in motors: 15 each
Flexible Piezo Strip,approx 4in long ($10) has leads soldered on
Lego Nxt White microcontroller brick, also have much of the lego set left! nerdgasm... but no sensors or motors. OPEN TO OFFERS
lego nxt servo board(7)
2 PK-268-01B 250ozin motors, these are beastly motors, but need high voltage and 1 amp per phase... one has a dual shaft, both have pulleys with set screws... one also has 2 leads cut off, so it needs to be driven half coil, unless you can solder onto the small leads that are left (can take a picture) I'm open to offers on these, need to get rid of them... was 100, now 70 for both... also open to offers.
http://site.motadistribution.com/st2step.pdf

wanted to add canakit motor driver 15 - unused

adding 2 SHARP infrared sensors used, long range from sparkfun... with the jst connectors!!!! 8 each.
adding 3 makerbot optoendstop 2.1 kits, unopened: 3 each
servo tester from Hobbyking, used once to test a brushless motor: 4

I need to get rid of this stuff, so I will go down on prices easily, please ask, and I can do photos through email.

I will totally do deals for multiple things, and I would love to sell as one giant package, email please at

mjk.kirschner@gmail.com

I can send photos

NEW PRICES!

2

Hmmm, I'm a little suspicious about how "1 hour" is a good indication of how used the things are...
XD

One could do a lot to a motor driver in 1 hour...
XD XD

3

sciguy:
Hmmm, I'm a little suspicious about how "1 hour" is a good indication of how used the things are...
XD

One could do a lot to a motor driver in 1 hour...
XD XD

Yea, those damaging electrons move at the speed of light you know. :smiley:

4

haha yeah, to be explicit, they had pulleys attached and were run at 14 volts with chopper drivers, lifting a fishing weight.

5

just wanted to note, all prices include shipping, but that they're not the end all..... I'm very open to offers...on anything.

6

Where are you located? Can you ship to the US? (California specifically)

7

I'm located in Buffalo, NY, and can totally ship to the US :slight_smile:

8

stuff must go, rent approaching...lowball me!

9

if anyone is interested I dropped a bunch of prices.

10

If I was in a better situation financially.. :frowning:

11

I snatched the wifi and servo driver. Paid Saturday, mailed Monday and arrived today. Great deal. Anyone interested I recommend jumping on these deals.

12

All:

I got the EasyDriver boards, ESC's, and the Sharp sensors today; I ordered and payed for them last Thursday (3/17), received them today (3/25). While not as fast as biocow's order, holyjewsus was very responsive to my emails and questions. Overall I think that speaks volumes about the whole experience, especially since he isn't running this as a business enterprise.

:slight_smile:

Thank you, holyjewsus, for the parts and your efforts. I'm not sure what I'll use any of them for, just yet, but I imagine I'll find something to do with them eventually!

13

Bah... how much did shipping cost?

I CANT HELP IT!

Nevermind, just saw the note about the prices including shipping... sending PM

14

added cana kit

15

holyjewsus:
added cana kit

which one?

16

http://www.sparkfun.com/products/9670

that guy

17

School is ending soon, and once again I have loads of left over electronics, some unopened or barely used. I'll be posting everything up as soon as all finals are complete, wondering if anyone is interested in a large amount of stuff for a large amount off?

18

Post it up, and let's see... :slight_smile:

19

okay, first batch of stuff... that I have on hand at the moment:

GPS http://www.sparkfun.com/products/8975 totally unused: 45
Any volt micro voltage regulator: 5
still have sparkfun color lcd shield
2 LED bar graphs unusued: 1 dollar each
ultrasonic range finder: Ultrasonic Range Finder - LV-MaxSonar-EZ2 - SEN-08503 - SparkFun Electronics totally unused, still sealed: 18
Protoshield assembled: 10
another sparkfun easy driver(headers soldered on but this one was never run...though it was on the bottom of my artbin :wink: : 10
openlog data logger with 1 microsd flash card: 20
optoisolator breakout on sparkfun: totally unused: 2
2 xbees with chip antennas: never used! 20 each
xbee regulated explorer: never used 5
xbee usb explorer: never used 15
canakit motor driver as posted before 2amp one from sparkfun.

and I still have any other stuff from the first post I forgot, I'm going to be uploading another round of stuff soon... It's not rent this time... it's 3d modeling software...so expensive.

20

it's 3d modeling software...so expensive.

Ooh, what software? I have used pro desktop and pro engineer at my school (two 3d moddeling programs). They are hard to use (well, pro desktop is. Peo engineer is much easier), but great fun!

Onions.