How to code internal interrupt on arduino due

Official Hardware Mega Due
1

Hi there, i want to translate this code on arduino uno to the arduino due.
please help

 //Arduino (Atmega) pins default to inputs, so they don't need to be explicitly declared as inputs
  PCICR |= (1 << PCIE0);    // set PCIE0 to enable PCMSK0 scan
  PCMSK0 |= (1 << PCINT0);  // set PCINT0 (digital input 8) to trigger an interrupt on state change
  PCMSK0 |= (1 << PCINT1);  // set PCINT1 (digital input 9)to trigger an interrupt on state change
  PCMSK0 |= (1 << PCINT2);  // set PCINT2 (digital input 10)to trigger an interrupt on state change
  PCMSK0 |= (1 << PCINT3);  // set PCINT3 (digital input 11)to trigger an interrupt on state change
2

Have you read this page?

https://www.arduino.cc/en/Reference/AttachInterrupt

3

Dear jone31,

Did you ever figure out how to translate the code onto the ardunio due?

Cheers,

Josh