I2C

Forum 2005-2010 (read only) Hardware Interfacing
1

I now understand how the Wire library works, but I just have one question.
I'm going to get this DAC:

I looked at the datasheet, and I couldn't figure out what the address is. I did see "1100," but I though that the address had to be 7 or 10 bits. Look under section 7.2 of the datasheet.

2

Nevermind. Its:

1100 0 0 0
device A2 A1 A0(tied to ground on breakout)
code

or 0x60