I am interested in the same machine. I need a program like this. The system has two-stage engine, 5 buttons and a screen. The button can both move the first motor back and forth. The other two noses can move the second motive back and forth, the fifth button will confirm. When the program is run, the first motor will close the mold (the mold has been changed, the closing point and the maximum and minimum point should be adjustable). Then the second motor should run the plastic for a set time, press the plastic and stop slowly. After waiting for a set time period, the first motor should open the mold while the second motor should retract slightly. Then, after some waiting time, the process should be repeated.