MKR Iot Carrier MKR1010 - MAX6675 using SPI

[apagliari]

Another approach I found quite interesting and ingenious is here below:

Free pins on the MKR IOT carrier when connected to an MKR-1010

SOLVED. The only way I could be sure that nothing would interfere with the pins I need was to put a set of female headers between the MCU and the carrier on all the pins except those I need for my I/O. Here's what that looks like: [IMG_2820] WARNING: you just need to choose pins that are not needed for the carrier functionality you intend to use.