Portenta C33 with Nicla Sense ME

Has anyone successfully connected the Nicla Sense ME via ESLOV cable with the Portenta C33 or any confirmation that this is not supported at all? Thank you

From what I've read, ESLOV is dead and gone:

https://www.kickstarter.com/projects/iot-invention-kit/eslov-iot-invention-kit

It is true that Arduino's Kickstarter campaign a decade ago to fund the creation of an "ESLOV" line of modular hardware was not successful.

However, what that AI slop blog missed is the fact that Arduino later created multiple non-crowdfunded hardware products that have a connector for easy communication with other hardware devices via the I2C bus. Arduino used the original "ESLOV" name for this connector.

This connector is present on the Arduino Portenta C33 and Portenta H7 boards, as well as the entire Nicla family and the majority of the MKR board family.

I can confirm that Nicla Sense ME over ESLOV is working on the Portenta C33. I got a stable setup with the following:

  • Official Arduino_BHY2Host library, BHY2Host.begin(false, NICLA_VIA_ESLOV) — no custom I2C needed.
  • Heading from the SENSOR_ID_GEORV quaternion via atan2.
  • Wire.setWireTimeout(1000, true) set after begin().
  • One manual I2C bus recovery (toggle SCL + STOP condition) before connecting, in case the bus is stuck from a previous reset.