Problem with A9G GPS Location Reception

Hello everyone,

I’m having an issue with my A9G module when it comes to receiving GPS locations. Currently, I’m trying to ensure that the locations are displayed correctly in the serial output. The locations I’m receiving are in the following format:

$GNRMC,090455.097,V,3928.0366,N,00622.6689,W,0.074,283.15,261024,,,N*40.

As I’ve read, the "V" indicates "no valid data," and it should display an "A" instead.

Here’s my code, which is quite basic:

#include <SoftwareSerial.h> 

SoftwareSerial a9g(4, 3); 

void setup() {
  Serial.begin(115200); 
  a9g.begin(9600);     
  Serial.println("Iniciando GPS...");

  a9g.println("AT");

  a9g.println("AT+GPS=1");

  a9g.println("AT+GPSRD=10"); 
}

void loop() {
  if (a9g.available()) {
    Serial.write(a9g.read());
  }
}

If anyone could help me out, I would greatly appreciate it!

Thank you!

You started a topic in the Uncategorised category of the forum when its description explicitly tells you not to

Your topic has been moved to a relevant category. Please be careful in future when deciding where to start new topics

The $GPGSV line says the GPS is only receiving data from one satellite and the signal is not very strong. You need to receive at least 4 satellites for a good location fix.

Is the GPS outdoors with a good view of the sky ?

Thank you very much for your response! I managed to solve the issue since it seems there wasn't much coverage at my house. Now, I'm trying to figure out how to send the locations to my database via HTTP. I'm using an Arduino Uno and an A9G. If anyone can help me with that, I would really appreciate it!