Continue from [image] RP2040_PWM Library for multichannel hardware-based PWMs Libraries RP2040_PWM library [GitHub release] How To Install Using Arduino Library Manager Features This PWM-wrapper library enables you to use Hardware-PWM blocks on RP2040-based boards to create and output PWM any GPIO pin. These purely hardware-based PWM channels can generate from very low (lowest is 7.5Hz) to very high PWM frequencies (in the MHz range, up to 62.5MHz). The most important feature is they're purely hardware-based PWM channels. Therefore, their operations are not blocked by bad-be… Releases v1.2.0 Add efficient setPWM_manual() function to use in wafeform creation using PWM. Check Duty cycle as integer rather than float #6 Add example PWM_Waveform to demonstrate how to use new setPWM_manual() function in wafeform creation Optimize library code and examples by using reference-passing instead of value-passing. Releases v1.1.1 Fix compiler warnings. Display informational warning when _PWM_LOGLEVEL_ > 3 Releases v1.1.0 Permit PWM output for both channels of PWM slice. Check Request for Clarification on PWM Slices and A/B sides #5 Use float instead of double for frequency and duty-cycle Add example PWM_MultiChannel to demonstrate how to use both channels of PWM slice. Releases v1.0.5 Permit changing dutyCycle and keep same frequency on-the-fly. Check Attempting to Alter the Duty Cycle w/o changing any other values #3 Add example PWM_DynamicDutyCycle to demonstrate new feature Add support for more boards using arduino-pico core, such as ADAFRUIT_ITSYBITSY_RP2040, CYTRON_MAKER_NANO_RP2040, SPARKFUN_PROMICRO_RP2040, CHALLENGER_2040_WIFI_RP2040, ILABS_2040_RPICO32_RP2040, MELOPERO_SHAKE_RP2040, SOLDERPARTY_RP2040_STAMP, UPESY_RP2040_DEVKIT, WIZNET_5100S_EVB_PICO, etc. Display compiler informational warning messages only when _PWM_LOGLEVEL_ > 3 Releases v1.0.4 Fix platform in library.json Releases v1.0.3 Not reprogram if same PWM frequency. Add PIO strict lib_compat_mode

Releases v1.3.0 Add setPWM_manual(pin, level) function for efficiency in wafeform creation using PWM. Check Duty cycle as integer rather than float #6 Add example PWM_Waveform_Fast to demonstrate how to use new setPWM_manual(pin, level) function. Add setPWM_Int() function for optional uint32_t dutycycle = real_dutycycle * 1000. Check Duty cycle as integer rather than float #6 Add example PWM_DynamicDutyCycle_Int to demonstrate how to use new setPWM_Int() function. Rewrite many functions to take advantage of new features.

I REALLY appreciate your library and examples. I'm a little new to this (Arduino coding) and I'm having some trouble integrating your examples into my needs. I'm attempting to build a small robot car, 2 motors, motor controller encoders and PID. I'm in sore need to change the PWM freq as motors growl if not supplied with the correct frequencies. They like 1.6K. I've had some experience with Adafruit products and their Motor shield. I can change the frequency in the code. But arduinos are slower and don't have the IO Pins this litttle jewel RP2040 has. I'm thinking your example concerning Dynamic Duty Cycle show be my focus because of the change in duty cycles this project needs. I found no reference about changing the frquency in using the analogwrite() function in arduinos. Could you give me some guidance? Bo Moffett

Hi @bodat861 You can't use analogwrite() function to change frequency while using this library. Please have a look at the example PWM_DynamicFreq and you'll see how to change the frequency (from 7.5Hz up to 62.5MHz) by using the following function bool setPWM(const uint8_t& pin, const float& frequency, const float& dutycycle, bool phaseCorrect = false) Good Luck,

oh I see. Thank you for the help! Bo

Hi, I need to use the Raspberry to measure frequencies. Does this library allow to use PWM input as a pulse counter or frequency measurement?

No. It's better to use pin interrupt, or RPI_PICO_TimerInterrupt / MBED_RPI_PICO_TimerInterrupt library for that purpose.

Thanks for your reply. I tried to use attachinterrupt and when I change state with one pin and read it with the other it works. But when I connect an external signal (about 250kHz), at the moment of connection the program stops sending readings by serial communication. After disconnecting the external signal, communication comes back and the "overdue" pulses are read.

Please check if you have the same issue here (PULL_UP resistor) [image] Interrupt on digital pin does not work on Nano RP2040 Connect Nano RP2040 Connect I tested on Nano_RP2040_Connect using ArduinoCore-mbed core and attachInterrupt() is working OK as expected. Be sure to use good enough PULL_UP resistor (4.7K-10K) from the pin to +3.3V Use this test program with debounce /* * Pin_Interrupt_Test.ino * Written by Khoi Hoang (https://github.com/khoih-prog/) */ #if !( defined(ARDUINO_NANO_RP2040_CONNECT) && defined(ARDUINO_ARCH_MBED) ) #error This code is intended to run on ARDUINO_NANO_RP2040_CONNECT uaing the mbed_nano platform! Please c…

This sounds really nice is it possible to phaseshift the pwms in relation to each other? So I want pwm0 start at 0 turn off at 10 pwm1 start at 20 stop at 30 and so on.

Releases v1.4.0 Fix glitch when dynamically changing dutycycle. Check Changing Duty Cycle Dynamically Creates Runt PWM pulse #10 Adjust MIN_PWM_FREQUENCY and MAX_PWM_FREQUENCY dynamically according to actual F_CPU Update examples Releases v1.3.1 Add minimal example PWM_Basic. Check added minimal viable program to get the user up and running #9

RP2040_PWM Library

Official Hardware Nano Family Nano RP2040 Connect

khoih-prog June 21, 2022, 1:06pm 9

Please check if you have the same issue here (PULL_UP resistor)

Topic		Replies	Views
RP2040_PWM Library for multichannel hardware-based PWMs Libraries	2	2645	October 4, 2021
Hardware-based-PWM MBED_RP2040_PWM library for Nano_RP2040_Connect and RASPBERRY_PI_PICO Libraries	0	881	February 10, 2022
Library RP2040_pwm don't compile Libraries	3	1825	September 29, 2023
100kHz PWM on Arduino Nano RP2040 Connect General Guidance	16	3066	November 24, 2023
PWM library on RP2040 Programming	9	1816	February 2, 2023

RP2040_PWM Library

Related topics