Servo library fails to compile: "This library only supports boards with an AVR, SAM, SAMD, NRF52, STM32F4, Renesas or XMC processor."

Projects Programming
1

WARNING: library Servo claims to run on avr, megaavr, sam, samd, nrf52, stm32f4, mbed, mbed_nano, mbed_portenta, mbed_rp2040, renesas, renesas_portenta, renesas_uno architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from C:\Users\Lenovo\AppData\Local\Temp.arduinoIDE-unsaved2024618-9032-83dwns.qxmpc\sketch_jul18a\sketch_jul18a.ino:1:
C:\Users\Lenovo\AppData\Local\Arduino15\libraries\Servo\src/Servo.h:81:2: error: #error "This library only supports boards with an AVR, SAM, SAMD, NRF52, STM32F4, Renesas or XMC processor."
81 | #error "This library only supports boards with an AVR, SAM, SAMD, NRF52, STM32F4, Renesas or XMC processor."
| ^~~~~
exit status 1

Compilation error: exit status 1

if i have promblen like this, what i should do ??

2

If you have a ESP32 board, then you can not use the Servo library.
Find another library, for example the "ESP32Servo" library.

The build environment has been upgraded to version 3 and some Servo libraries do no longer work. I'm not sure if that library works. Be sure to update all the boards and all the libraries in the Arduino IDE.

Here are the changes for the upgrade to version 3: https://docs.espressif.com/projects/arduino-esp32/en/latest/migration_guides/2.x_to_3.0.html