Tool bar missing

[jdeckerus]

I've installed a fresh Fedora 36. I download arduino 1.8.19 and untared it.
I executed sudo ./install.sh in the untared directory. When I start up Arduino I don't have a tool bar. What am I missing.

[xfpd]

There has been an issue with installing from a package manager... let me dig up the post that solves all the Linux problems... standby...

This link:

Installing Arduino IDE 1.8.19 on Raspbian Buster

I was finally able to get the Arduino IDE 1.8.19 installed on a Raspberry Pi 4 running the 32-bit O/S version of Raspbian Buster. Do not follow the step of: sudo apt-get install arduino This will install a very old version. Instead, the steps I had to follow (from a terminal window) are: mkdir ArduinoPgm mkdir Arduino cd ArduinoPgm wget https://downloads.arduino.cc/arduino-1.8.19-linuxarm.tar.xz tar -xvf arduino-1.8.19-linuxarm.tar.xz cd arduino-1.8.19 sudo ./install.sh sudo sh ./…

You will see in the linked thread someone had trouble with "the tutorial"... the original poster's information (not a tutorial - however; someone posted another tutorial link) made my "non-functioning" IDE work in Linux when my package manager failed (no icon, no launcher, et c.).

[jdeckerus]

xfpd,

I saw that post and it does not apply to me, I'm using tar not a package manager.
1.8.19 on a freshly installed fedora does not show the top menu bar. See attached.

I'm not a fan of JAVA, I may start looking at the new 2.0 system, I understand it does not use JAVA.

jdeckerus

[xfpd]

The procedure in the link uses tar.