i'm having issues with my newly bought arduino uno rev3.... the IDE only shows /dev/ttyS0 for Port, no other options are available tried to
ls -l /dev/ttyACM* and ls -l /dev/ttyUSB*
but it only came back as
ls: cannot access '/dev/ttyUSB*': No such file or directory
and
ls: cannot access '/dev/ttyACM*': No such file or directory
I assume this is on a Linux system, not on a Mac.
What do dmesg and lsusb say?
Which board do you use?
Have you tried different cables?
[ian@dev-station ~]$ dmesg
[ 0.000000] Linux version 5.14.18-200.fc34.x86_64 (mockbuild@bkernel02.iad2.fedoraproject.org) (gcc (GCC) 11.2.1 20210728 (Red Hat 11.2.1-1), GNU ld version 2.35.2-6.fc34) #1 SMP Fri Nov 12 16:48:10 UTC 2021
[ 0.000000] Command line: BOOT_IMAGE=(hd0,msdos1)/vmlinuz-5.14.18-200.fc34.x86_64 root=UUID=75f90d8d-4fcb-4393-8f53-caa74d327eba ro rootflags=subvol=root rd.luks.uuid=luks-e12cd2ce-f90e-47a6-a7b5-c2b17aeb068b rhgb quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[ 0.000000] signal: max sigframe size: 1776
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009e1ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009e20000-0x0000000009ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20afff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000000a20b000-0x000000000affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x000000003c708fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003c709000-0x000000003ca10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003ca11000-0x000000003ca51fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000003ca52000-0x000000003d0cafff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003d0cb000-0x000000003dffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003dfff000-0x000000003effffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003f000000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd100000-0x00000000fd1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043f33ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000043f340000-0x000000043fffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.3.0 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. B550M DS3H AC/B550M DS3H AC, BIOS F11 12/31/2020
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3593.478 MHz processor
[ 0.000377] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000379] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000385] last_pfn = 0x43f340 max_arch_pfn = 0x400000000
[ 0.000582] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000787] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000807] last_pfn = 0x3f000 max_arch_pfn = 0x400000000
[ 0.004297] Using GB pages for direct mapping
[ 0.004760] RAMDISK: [mem 0x327d0000-0x353dffff]
[ 0.004763] ACPI: Early table checksum verification disabled
[ 0.004766] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[ 0.004770] ACPI: XSDT 0x000000003D0B3728 0000C4 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.004775] ACPI: FACP 0x000000003CA3C000 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.004779] ACPI: DSDT 0x000000003CA35000 0063D3 (v02 ALASKA A M I 01072009 INTL 20190509)
[ 0.004782] ACPI: FACS 0x000000003D0AE000 000040
[ 0.004784] ACPI: SSDT 0x000000003CA48000 009BF6 (v01 GBT GSWApp 00000001 INTL 20190509)
[ 0.004787] ACPI: SSDT 0x000000003CA42000 005419 (v02 AMD Artic 00000002 MSFT 04000000)
[ 0.004790] ACPI: SSDT 0x000000003CA3E000 003C65 (v01 AMD AMD AOD 00000001 INTL 20190509)
[ 0.004792] ACPI: SSDT 0x000000003CA3D000 000139 (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
[ 0.004795] ACPI: FIDT 0x000000003CA34000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.004797] ACPI: MCFG 0x000000003CA33000 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.004799] ACPI: HPET 0x000000003CA32000 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.004802] ACPI: IVRS 0x000000003CA30000 0000D0 (v02 AMD AmdTable 00000001 AMD 00000000)
[ 0.004804] ACPI: SSDT 0x000000003CA2E000 0011C4 (v02 AMD AmdTable 00000001 AMD 00000001)
[ 0.004807] ACPI: CRAT 0x000000003CA2D000 000810 (v01 AMD AmdTable 00000001 AMD 00000001)
[ 0.004809] ACPI: CDIT 0x000000003CA2C000 000029 (v01 AMD AmdTable 00000001 AMD 00000001)
[ 0.004812] ACPI: SSDT 0x000000003CA2A000 001486 (v01 AMD ArticIG2 00000001 INTL 20190509)
[ 0.004814] ACPI: SSDT 0x000000003CA28000 0014F6 (v01 AMD ArticTPX 00000001 INTL 20190509)
[ 0.004816] ACPI: SSDT 0x000000003CA24000 0036E3 (v01 AMD ArticN 00000001 INTL 20190509)
[ 0.004819] ACPI: WSMT 0x000000003CA23000 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.004821] ACPI: APIC 0x000000003CA22000 00015E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.004823] ACPI: SSDT 0x000000003CA20000 00147F (v01 AMD ArticC 00000001 INTL 20190509)
[ 0.004826] ACPI: SSDT 0x000000003CA1F000 0000BF (v01 AMD AmdTable 00001000 INTL 20190509)
[ 0.004828] ACPI: FPDT 0x000000003CA1E000 000044 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.004830] ACPI: Reserving FACP table memory at [mem 0x3ca3c000-0x3ca3c113]
[ 0.004831] ACPI: Reserving DSDT table memory at [mem 0x3ca35000-0x3ca3b3d2]
[ 0.004832] ACPI: Reserving FACS table memory at [mem 0x3d0ae000-0x3d0ae03f]
[ 0.004833] ACPI: Reserving SSDT table memory at [mem 0x3ca48000-0x3ca51bf5]
[ 0.004834] ACPI: Reserving SSDT table memory at [mem 0x3ca42000-0x3ca47418]
[ 0.004835] ACPI: Reserving SSDT table memory at [mem 0x3ca3e000-0x3ca41c64]
[ 0.004836] ACPI: Reserving SSDT table memory at [mem 0x3ca3d000-0x3ca3d138]
[ 0.004837] ACPI: Reserving FIDT table memory at [mem 0x3ca34000-0x3ca3409b]
[ 0.004837] ACPI: Reserving MCFG table memory at [mem 0x3ca33000-0x3ca3303b]
[ 0.004838] ACPI: Reserving HPET table memory at [mem 0x3ca32000-0x3ca32037]
[ 0.004839] ACPI: Reserving IVRS table memory at [mem 0x3ca30000-0x3ca300cf]
[ 0.004840] ACPI: Reserving SSDT table memory at [mem 0x3ca2e000-0x3ca2f1c3]
[ 0.004840] ACPI: Reserving CRAT table memory at [mem 0x3ca2d000-0x3ca2d80f]
[ 0.004841] ACPI: Reserving CDIT table memory at [mem 0x3ca2c000-0x3ca2c028]
[ 0.004842] ACPI: Reserving SSDT table memory at [mem 0x3ca2a000-0x3ca2b485]
[ 0.004842] ACPI: Reserving SSDT table memory at [mem 0x3ca28000-0x3ca294f5]
[ 0.004843] ACPI: Reserving SSDT table memory at [mem 0x3ca24000-0x3ca276e2]
[ 0.004844] ACPI: Reserving WSMT table memory at [mem 0x3ca23000-0x3ca23027]
[ 0.004845] ACPI: Reserving APIC table memory at [mem 0x3ca22000-0x3ca2215d]
[ 0.004845] ACPI: Reserving SSDT table memory at [mem 0x3ca20000-0x3ca2147e]
[ 0.004846] ACPI: Reserving SSDT table memory at [mem 0x3ca1f000-0x3ca1f0be]
[ 0.004847] ACPI: Reserving FPDT table memory at [mem 0x3ca1e000-0x3ca1e043]
[ 0.004932] No NUMA configuration found
[ 0.004933] Faking a node at [mem 0x0000000000000000-0x000000043f33ffff]
[ 0.004940] NODE_DATA(0) allocated [mem 0x43f315000-0x43f33ffff]
[ 0.034955] Zone ranges:
[ 0.034958] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.034960] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.034962] Normal [mem 0x0000000100000000-0x000000043f33ffff]
[ 0.034963] Device empty
[ 0.034964] Movable zone start for each node
[ 0.034966] Early memory node ranges
[ 0.034967] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.034968] node 0: [mem 0x0000000000100000-0x0000000009e1ffff]
[ 0.034969] node 0: [mem 0x000000000a000000-0x000000000a1fffff]
[ 0.034970] node 0: [mem 0x000000000a20b000-0x000000000affffff]
[ 0.034970] node 0: [mem 0x000000000b020000-0x000000003c708fff]
[ 0.034971] node 0: [mem 0x000000003dfff000-0x000000003effffff]
[ 0.034972] node 0: [mem 0x0000000100000000-0x000000043f33ffff]
[ 0.034974] Initmem setup node 0 [mem 0x0000000000001000-0x000000043f33ffff]
[ 0.034980] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.035012] On node 0, zone DMA: 99 pages in unavailable ranges
[ 0.035311] On node 0, zone DMA32: 480 pages in unavailable ranges
[ 0.035342] On node 0, zone DMA32: 11 pages in unavailable ranges
[ 0.036972] On node 0, zone DMA32: 32 pages in unavailable ranges
[ 0.037070] On node 0, zone DMA32: 6390 pages in unavailable ranges
[ 0.064847] On node 0, zone Normal: 4096 pages in unavailable ranges
[ 0.064881] On node 0, zone Normal: 3264 pages in unavailable ranges
[ 0.065126] ACPI: PM-Timer IO Port: 0x808
[ 0.065134] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.065152] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
[ 0.065164] IOAPIC[1]: apic_id 10, version 33, address 0xfec01000, GSI 24-55
[ 0.065166] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.065167] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.065170] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.065171] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.065176] smpboot: Allowing 32 CPUs, 24 hotplug CPUs
[ 0.065203] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.065205] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.065206] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.065207] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.065208] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.065209] PM: hibernation: Registered nosave memory: [mem 0x09e20000-0x09ffffff]
[ 0.065211] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20afff]
[ 0.065212] PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[ 0.065214] PM: hibernation: Registered nosave memory: [mem 0x3c709000-0x3ca10fff]
[ 0.065215] PM: hibernation: Registered nosave memory: [mem 0x3ca11000-0x3ca51fff]
[ 0.065215] PM: hibernation: Registered nosave memory: [mem 0x3ca52000-0x3d0cafff]
[ 0.065216] PM: hibernation: Registered nosave memory: [mem 0x3d0cb000-0x3dffefff]
[ 0.065217] PM: hibernation: Registered nosave memory: [mem 0x3f000000-0xbfffffff]
[ 0.065218] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xefffffff]
[ 0.065219] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[ 0.065219] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfd0fffff]
[ 0.065220] PM: hibernation: Registered nosave memory: [mem 0xfd100000-0xfd1fffff]
[ 0.065221] PM: hibernation: Registered nosave memory: [mem 0xfd200000-0xfe9fffff]
[ 0.065221] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[ 0.065222] PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[ 0.065223] PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[ 0.065223] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[ 0.065224] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.065225] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[ 0.065225] PM: hibernation: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[ 0.065226] PM: hibernation: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[ 0.065226] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.065227] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.065228] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.065228] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.065229] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.065230] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[ 0.065230] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[ 0.065231] PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[ 0.065231] PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[ 0.065232] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfeffffff]
[ 0.065233] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.065234] [mem 0xc0000000-0xefffffff] available for PCI devices
[ 0.065235] Booting paravirtualized kernel on bare hardware
[ 0.065238] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.069562] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
[ 0.071041] percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u262144
[ 0.071052] pcpu-alloc: s188416 r8192 d28672 u262144 alloc=1*2097152
[ 0.071054] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.071062] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
[ 0.071107] Built 1 zonelists, mobility grouping on. Total pages: 3598366
[ 0.071109] Policy zone: Normal
[ 0.071110] Kernel command line: BOOT_IMAGE=(hd0,msdos1)/vmlinuz-5.14.18-200.fc34.x86_64 root=UUID=75f90d8d-4fcb-4393-8f53-caa74d327eba ro rootflags=subvol=root rd.luks.uuid=luks-e12cd2ce-f90e-47a6-a7b5-c2b17aeb068b rhgb quiet
[ 0.071180] Unknown command line parameters: rhgb BOOT_IMAGE=(hd0,msdos1)/vmlinuz-5.14.18-200.fc34.x86_64
[ 0.072877] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.073772] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.073859] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.107224] Memory: 14195688K/14622572K available (16393K kernel code, 3531K rwdata, 10060K rodata, 2872K init, 4908K bss, 426624K reserved, 0K cma-reserved)
[ 0.107231] random: get_random_u64 called from __kmem_cache_create+0x2a/0x500 with crng_init=0
[ 0.107605] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[ 0.107644] ftrace: allocating 46962 entries in 184 pages
[ 0.120564] ftrace: allocated 184 pages with 4 groups
[ 0.120747] rcu: Hierarchical RCU implementation.
[ 0.120748] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32.
[ 0.120749] Trampoline variant of Tasks RCU enabled.
[ 0.120749] Rude variant of Tasks RCU enabled.
[ 0.120750] Tracing variant of Tasks RCU enabled.
[ 0.120751] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.120752] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
[ 0.123709] NR_IRQS: 524544, nr_irqs: 1224, preallocated irqs: 16
[ 0.125634] random: crng done (trusting CPU's manufacturer)
[ 0.130650] Console: colour VGA+ 80x25
[ 0.130659] printk: console [tty0] enabled
[ 0.130712] ACPI: Core revision 20210604
[ 0.130901] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.130932] APIC: Switch to symmetric I/O mode setup
[ 0.132270] Switched APIC routing to physical flat.
[ 0.133466] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.137935] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33cc425c09b, max_idle_ns: 440795309164 ns
[ 0.137942] Calibrating delay loop (skipped), value calculated using timer frequency.. 7186.95 BogoMIPS (lpj=3593478)
[ 0.137944] pid_max: default: 32768 minimum: 301
[ 0.138026] LSM: Security Framework initializing
[ 0.138052] Yama: becoming mindful.
[ 0.138058] SELinux: Initializing.
[ 0.138121] LSM support for eBPF active
[ 0.138122] landlock: Up and running.
[ 0.138177] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.138204] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.138752] LVT offset 1 assigned for vector 0xf9
[ 0.138800] LVT offset 2 assigned for vector 0xf4
[ 0.138814] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.138815] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
[ 0.138818] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.138820] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.138821] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.138822] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.138823] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.143087] Freeing SMP alternatives memory: 44K
[ 0.246880] smpboot: CPU0: AMD Ryzen 5 2400G with Radeon Vega Graphics (family: 0x17, model: 0x11, stepping: 0x0)
[ 0.246938] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[ 0.246938] ... version: 0
[ 0.246938] ... bit width: 48
[ 0.246938] ... generic registers: 6
[ 0.246938] ... value mask: 0000ffffffffffff
[ 0.246938] ... max period: 00007fffffffffff
[ 0.246938] ... fixed-purpose events: 0
[ 0.246938] ... event mask: 000000000000003f
[ 0.246938] rcu: Hierarchical SRCU implementation.
[ 0.246938] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.247174] smp: Bringing up secondary CPUs ...
[ 0.247238] x86: Booting SMP configuration:
[ 0.247238] .... node #0, CPUs: #1
[ 0.007970] __common_interrupt: 1.55 No irq handler for vector
[ 0.249016] #2
[ 0.007970] __common_interrupt: 2.55 No irq handler for vector
[ 0.250028] #3
[ 0.007970] __common_interrupt: 3.55 No irq handler for vector
[ 0.252000] #4
[ 0.007970] __common_interrupt: 4.55 No irq handler for vector
[ 0.254040] #5
[ 0.007970] __common_interrupt: 5.55 No irq handler for vector
[ 0.255014] #6
[ 0.007970] __common_interrupt: 6.55 No irq handler for vector
[ 0.256999] #7
[ 0.007970] __common_interrupt: 7.55 No irq handler for vector
[ 0.258946] smp: Brought up 1 node, 8 CPUs
[ 0.258948] smpboot: Max logical packages: 4
[ 0.258949] smpboot: Total of 8 processors activated (57495.64 BogoMIPS)
[ 0.260052] devtmpfs: initialized
[ 0.260052] x86/mm: Memory block size: 128MB
[ 0.261004] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20afff] (45056 bytes)
[ 0.261004] ACPI: PM: Registering ACPI NVS region [mem 0x3ca52000-0x3d0cafff] (6787072 bytes)
[ 0.261107] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.261111] futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
[ 0.261262] pinctrl core: initialized pinctrl subsystem
[ 0.261376] PM: RTC time: 06:07:39, date: 2021-11-25
[ 0.261558] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.261631] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.261635] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.261637] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.261646] audit: initializing netlink subsys (disabled)
[ 0.261652] audit: type=2000 audit(1637820459.130:1): state=initialized audit_enabled=0 res=1
[ 0.261652] thermal_sys: Registered thermal governor 'fair_share'
[ 0.261652] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.261652] thermal_sys: Registered thermal governor 'step_wise'
[ 0.261652] thermal_sys: Registered thermal governor 'user_space'
[ 0.261652] cpuidle: using governor menu
[ 0.262059] ACPI: bus type PCI registered
[ 0.262061] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.262189] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.262194] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[ 0.262209] PCI: Using configuration type 1 for base access
[ 0.264030] Kprobes globally optimized
[ 0.264030] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.264030] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.387078] cryptd: max_cpu_qlen set to 1000
[ 0.390039] alg: No test for 842 (842-generic)
[ 0.390039] alg: No test for 842 (842-scomp)
[ 0.394011] raid6: skip pq benchmark and using algorithm avx2x4
[ 0.394014] raid6: using avx2x2 recovery algorithm
[ 0.394095] ACPI: Added _OSI(Module Device)
[ 0.394096] ACPI: Added _OSI(Processor Device)
[ 0.394097] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.394098] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.394099] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.394100] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.394101] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.403242] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 0.404304] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.410466] ACPI: Interpreter enabled
[ 0.410480] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.410481] ACPI: Using IOAPIC for interrupt routing
[ 0.410772] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.411079] ACPI: Enabled 6 GPEs in block 00 to 1F
[ 0.417079] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.417084] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.417188] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC]
[ 0.417286] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.417294] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
[ 0.417512] PCI host bridge to bus 0000:00
[ 0.417514] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.417515] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.417517] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.417518] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.417519] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.417520] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.417521] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfec2ffff window]
[ 0.417522] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[ 0.417523] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.417537] pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000
[ 0.417664] pci 0000:00:00.2: [1022:15d1] type 00 class 0x080600
[ 0.417816] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
[ 0.417941] pci 0000:00:01.2: [1022:15d3] type 01 class 0x060400
[ 0.417989] pci 0000:00:01.2: enabling Extended Tags
[ 0.418061] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[ 0.418216] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
[ 0.418321] pci 0000:00:08.1: [1022:15db] type 01 class 0x060400
[ 0.418372] pci 0000:00:08.1: enabling Extended Tags
[ 0.418435] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[ 0.418551] pci 0000:00:08.2: [1022:15dc] type 01 class 0x060400
[ 0.418601] pci 0000:00:08.2: enabling Extended Tags
[ 0.418668] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
[ 0.418822] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[ 0.418992] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[ 0.419169] pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000
[ 0.419206] pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000
[ 0.419256] pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000
[ 0.419293] pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000
[ 0.419329] pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000
[ 0.419365] pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000
[ 0.419402] pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000
[ 0.419438] pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000
[ 0.419559] pci 0000:01:00.0: [1022:43ee] type 00 class 0x0c0330
[ 0.419582] pci 0000:01:00.0: reg 0x10: [mem 0xfcea0000-0xfcea7fff 64bit]
[ 0.419635] pci 0000:01:00.0: enabling Extended Tags
[ 0.419701] pci 0000:01:00.0: PME# supported from D3hot D3cold
[ 0.419757] pci 0000:01:00.0: 7.876 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x1 link at 0000:00:01.2 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[ 0.419824] pci 0000:01:00.1: [1022:43eb] type 00 class 0x010601
[ 0.419886] pci 0000:01:00.1: reg 0x24: [mem 0xfce80000-0xfce9ffff]
[ 0.419896] pci 0000:01:00.1: reg 0x30: [mem 0xfce00000-0xfce7ffff pref]
[ 0.419905] pci 0000:01:00.1: enabling Extended Tags
[ 0.419959] pci 0000:01:00.1: PME# supported from D3hot D3cold
[ 0.420050] pci 0000:01:00.2: [1022:43e9] type 01 class 0x060400
[ 0.420109] pci 0000:01:00.2: enabling Extended Tags
[ 0.420169] pci 0000:01:00.2: PME# supported from D3hot D3cold
[ 0.420291] pci 0000:00:01.2: PCI bridge to [bus 01-08]
[ 0.420296] pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
[ 0.420299] pci 0000:00:01.2: bridge window [mem 0xfcc00000-0xfcefffff]
[ 0.420404] pci 0000:02:00.0: [1022:43ea] type 01 class 0x060400
[ 0.420466] pci 0000:02:00.0: enabling Extended Tags
[ 0.420534] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.420655] pci 0000:02:04.0: [1022:43ea] type 01 class 0x060400
[ 0.420717] pci 0000:02:04.0: enabling Extended Tags
[ 0.420786] pci 0000:02:04.0: PME# supported from D3hot D3cold
[ 0.420900] pci 0000:02:06.0: [1022:43ea] type 01 class 0x060400
[ 0.420964] pci 0000:02:06.0: enabling Extended Tags
[ 0.421032] pci 0000:02:06.0: PME# supported from D3hot D3cold
[ 0.421151] pci 0000:02:07.0: [1022:43ea] type 01 class 0x060400
[ 0.421212] pci 0000:02:07.0: enabling Extended Tags
[ 0.421280] pci 0000:02:07.0: PME# supported from D3hot D3cold
[ 0.421410] pci 0000:02:08.0: [1022:43ea] type 01 class 0x060400
[ 0.421471] pci 0000:02:08.0: enabling Extended Tags
[ 0.421539] pci 0000:02:08.0: PME# supported from D3hot D3cold
[ 0.421652] pci 0000:02:09.0: [1022:43ea] type 01 class 0x060400
[ 0.421713] pci 0000:02:09.0: enabling Extended Tags
[ 0.421781] pci 0000:02:09.0: PME# supported from D3hot D3cold
[ 0.421903] pci 0000:01:00.2: PCI bridge to [bus 02-08]
[ 0.421909] pci 0000:01:00.2: bridge window [io 0xf000-0xffff]
[ 0.421913] pci 0000:01:00.2: bridge window [mem 0xfcc00000-0xfcdfffff]
[ 0.421965] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.422024] pci 0000:02:04.0: PCI bridge to [bus 04]
[ 0.422080] pci 0000:02:06.0: PCI bridge to [bus 05]
[ 0.422139] pci 0000:02:07.0: PCI bridge to [bus 06]
[ 0.422272] pci 0000:07:00.0: [8086:24fb] type 00 class 0x028000
[ 0.422327] pci 0000:07:00.0: reg 0x10: [mem 0xfcd00000-0xfcd01fff 64bit]
[ 0.422618] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 0.422838] pci 0000:02:08.0: PCI bridge to [bus 07]
[ 0.422848] pci 0000:02:08.0: bridge window [mem 0xfcd00000-0xfcdfffff]
[ 0.422949] pci 0000:08:00.0: [10ec:8168] type 00 class 0x020000
[ 0.422981] pci 0000:08:00.0: reg 0x10: [io 0xf000-0xf0ff]
[ 0.423024] pci 0000:08:00.0: reg 0x18: [mem 0xfcc04000-0xfcc04fff 64bit]
[ 0.423051] pci 0000:08:00.0: reg 0x20: [mem 0xfcc00000-0xfcc03fff 64bit]
[ 0.423225] pci 0000:08:00.0: supports D1 D2
[ 0.423226] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.423446] pci 0000:02:09.0: PCI bridge to [bus 08]
[ 0.423452] pci 0000:02:09.0: bridge window [io 0xf000-0xffff]
[ 0.423456] pci 0000:02:09.0: bridge window [mem 0xfcc00000-0xfccfffff]
[ 0.423615] pci 0000:09:00.0: [1002:15dd] type 00 class 0x030000
[ 0.423643] pci 0000:09:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.423661] pci 0000:09:00.0: reg 0x18: [mem 0xe0000000-0xe01fffff 64bit pref]
[ 0.423673] pci 0000:09:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.423685] pci 0000:09:00.0: reg 0x24: [mem 0xfcb00000-0xfcb7ffff]
[ 0.423705] pci 0000:09:00.0: enabling Extended Tags
[ 0.423830] pci 0000:09:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.424003] pci 0000:09:00.1: [1002:15de] type 00 class 0x040300
[ 0.424024] pci 0000:09:00.1: reg 0x10: [mem 0xfcb88000-0xfcb8bfff]
[ 0.424096] pci 0000:09:00.1: enabling Extended Tags
[ 0.424166] pci 0000:09:00.1: PME# supported from D1 D2 D3hot D3cold
[ 0.424256] pci 0000:09:00.2: [1022:15df] type 00 class 0x108000
[ 0.424298] pci 0000:09:00.2: reg 0x18: [mem 0xfca00000-0xfcafffff]
[ 0.424331] pci 0000:09:00.2: reg 0x24: [mem 0xfcb8c000-0xfcb8dfff]
[ 0.424350] pci 0000:09:00.2: enabling Extended Tags
[ 0.424522] pci 0000:09:00.3: [1022:15e0] type 00 class 0x0c0330
[ 0.424548] pci 0000:09:00.3: reg 0x10: [mem 0xfc900000-0xfc9fffff 64bit]
[ 0.424609] pci 0000:09:00.3: enabling Extended Tags
[ 0.424685] pci 0000:09:00.3: PME# supported from D0 D3hot D3cold
[ 0.424788] pci 0000:09:00.4: [1022:15e1] type 00 class 0x0c0330
[ 0.424814] pci 0000:09:00.4: reg 0x10: [mem 0xfc800000-0xfc8fffff 64bit]
[ 0.424875] pci 0000:09:00.4: enabling Extended Tags
[ 0.424951] pci 0000:09:00.4: PME# supported from D0 D3hot D3cold
[ 0.425057] pci 0000:09:00.6: [1022:15e3] type 00 class 0x040300
[ 0.425078] pci 0000:09:00.6: reg 0x10: [mem 0xfcb80000-0xfcb87fff]
[ 0.425149] pci 0000:09:00.6: enabling Extended Tags
[ 0.425219] pci 0000:09:00.6: PME# supported from D0 D3hot D3cold
[ 0.425357] pci 0000:00:08.1: PCI bridge to [bus 09]
[ 0.425363] pci 0000:00:08.1: bridge window [io 0xe000-0xefff]
[ 0.425366] pci 0000:00:08.1: bridge window [mem 0xfc800000-0xfcbfffff]
[ 0.425371] pci 0000:00:08.1: bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
[ 0.425458] pci 0000:0a:00.0: [1022:7901] type 00 class 0x010601
[ 0.425531] pci 0000:0a:00.0: reg 0x24: [mem 0xfcf00000-0xfcf007ff]
[ 0.425550] pci 0000:0a:00.0: enabling Extended Tags
[ 0.425644] pci 0000:0a:00.0: PME# supported from D3hot D3cold
[ 0.425789] pci 0000:00:08.2: PCI bridge to [bus 0a]
[ 0.425796] pci 0000:00:08.2: bridge window [mem 0xfcf00000-0xfcffffff]
[ 0.426224] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.426268] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[ 0.426303] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.426351] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.426392] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.426425] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.426458] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.426491] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.428959] iommu: Default domain type: Translated
[ 0.428962] pci 0000:09:00.0: vgaarb: setting as boot VGA device
[ 0.428963] pci 0000:09:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.428965] pci 0000:09:00.0: vgaarb: bridge control possible
[ 0.428966] vgaarb: loaded
[ 0.429066] SCSI subsystem initialized
[ 0.429079] libata version 3.00 loaded.
[ 0.429079] ACPI: bus type USB registered
[ 0.429079] usbcore: registered new interface driver usbfs
[ 0.429079] usbcore: registered new interface driver hub
[ 0.429079] usbcore: registered new device driver usb
[ 0.429079] pps_core: LinuxPPS API ver. 1 registered
[ 0.429079] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.429079] PTP clock support registered
[ 0.429079] EDAC MC: Ver: 3.0.0
[ 0.430061] NetLabel: Initializing
[ 0.430062] NetLabel: domain hash size = 128
[ 0.430063] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.430073] NetLabel: unlabeled traffic allowed by default
[ 0.430076] PCI: Using ACPI for IRQ routing
[ 0.435515] PCI: pci_cache_line_size set to 64 bytes
[ 0.435613] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[ 0.435615] e820: reserve RAM buffer [mem 0x09e20000-0x0bffffff]
[ 0.435616] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[ 0.435616] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[ 0.435617] e820: reserve RAM buffer [mem 0x3c709000-0x3fffffff]
[ 0.435618] e820: reserve RAM buffer [mem 0x3f000000-0x3fffffff]
[ 0.435619] e820: reserve RAM buffer [mem 0x43f340000-0x43fffffff]
[ 0.435988] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.435991] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.438063] clocksource: Switched to clocksource tsc-early
[ 0.448029] VFS: Disk quotas dquot_6.6.0
[ 0.448047] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.448134] pnp: PnP ACPI init
[ 0.448261] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.448313] system 00:01: [mem 0x40000000-0xbfffffff window] has been reserved
[ 0.448524] system 00:03: [io 0x0a00-0x0a2f] has been reserved
[ 0.448526] system 00:03: [io 0x0a30-0x0a3f] has been reserved
[ 0.448527] system 00:03: [io 0x0a40-0x0a4f] has been reserved
[ 0.448529] system 00:03: [mem 0xfe000000-0xfe00ffff] has been reserved
[ 0.448770] pnp 00:04: [dma 0 disabled]
[ 0.448944] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.448946] system 00:05: [io 0x040b] has been reserved
[ 0.448947] system 00:05: [io 0x04d6] has been reserved
[ 0.448948] system 00:05: [io 0x0c00-0x0c01] has been reserved
[ 0.448949] system 00:05: [io 0x0c14] has been reserved
[ 0.448950] system 00:05: [io 0x0c50-0x0c51] has been reserved
[ 0.448951] system 00:05: [io 0x0c52] has been reserved
[ 0.448951] system 00:05: [io 0x0c6c] has been reserved
[ 0.448952] system 00:05: [io 0x0c6f] has been reserved
[ 0.448953] system 00:05: [io 0x0cd0-0x0cd1] has been reserved
[ 0.448954] system 00:05: [io 0x0cd2-0x0cd3] has been reserved
[ 0.448955] system 00:05: [io 0x0cd4-0x0cd5] has been reserved
[ 0.448956] system 00:05: [io 0x0cd6-0x0cd7] has been reserved
[ 0.448957] system 00:05: [io 0x0cd8-0x0cdf] has been reserved
[ 0.448958] system 00:05: [io 0x0800-0x089f] has been reserved
[ 0.448959] system 00:05: [io 0x0b00-0x0b0f] has been reserved
[ 0.448960] system 00:05: [io 0x0b20-0x0b3f] has been reserved
[ 0.448961] system 00:05: [io 0x0900-0x090f] has been reserved
[ 0.448962] system 00:05: [io 0x0910-0x091f] has been reserved
[ 0.448963] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.448964] system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
[ 0.448966] system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
[ 0.448968] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.448969] system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
[ 0.448971] system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.448972] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.449396] pnp: PnP ACPI: found 6 devices
[ 0.455063] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.455146] NET: Registered PF_INET protocol family
[ 0.455363] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.456940] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.456972] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.457095] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.457223] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.457375] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[ 0.457403] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.457437] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.457562] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.457567] NET: Registered PF_XDP protocol family
[ 0.457587] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.457604] pci 0000:02:04.0: PCI bridge to [bus 04]
[ 0.457617] pci 0000:02:06.0: PCI bridge to [bus 05]
[ 0.457630] pci 0000:02:07.0: PCI bridge to [bus 06]
[ 0.457643] pci 0000:02:08.0: PCI bridge to [bus 07]
[ 0.457647] pci 0000:02:08.0: bridge window [mem 0xfcd00000-0xfcdfffff]
[ 0.457657] pci 0000:02:09.0: PCI bridge to [bus 08]
[ 0.457659] pci 0000:02:09.0: bridge window [io 0xf000-0xffff]
[ 0.457664] pci 0000:02:09.0: bridge window [mem 0xfcc00000-0xfccfffff]
[ 0.457673] pci 0000:01:00.2: PCI bridge to [bus 02-08]
[ 0.457676] pci 0000:01:00.2: bridge window [io 0xf000-0xffff]
[ 0.457680] pci 0000:01:00.2: bridge window [mem 0xfcc00000-0xfcdfffff]
[ 0.457689] pci 0000:00:01.2: PCI bridge to [bus 01-08]
[ 0.457691] pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
[ 0.457695] pci 0000:00:01.2: bridge window [mem 0xfcc00000-0xfcefffff]
[ 0.457705] pci 0000:00:08.1: PCI bridge to [bus 09]
[ 0.457712] pci 0000:00:08.1: bridge window [io 0xe000-0xefff]
[ 0.457716] pci 0000:00:08.1: bridge window [mem 0xfc800000-0xfcbfffff]
[ 0.457719] pci 0000:00:08.1: bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
[ 0.457725] pci 0000:00:08.2: PCI bridge to [bus 0a]
[ 0.457730] pci 0000:00:08.2: bridge window [mem 0xfcf00000-0xfcffffff]
[ 0.457740] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.457741] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.457742] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.457743] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.457744] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.457746] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.457747] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfec2ffff window]
[ 0.457748] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
[ 0.457749] pci_bus 0000:01: resource 0 [io 0xf000-0xffff]
[ 0.457750] pci_bus 0000:01: resource 1 [mem 0xfcc00000-0xfcefffff]
[ 0.457751] pci_bus 0000:02: resource 0 [io 0xf000-0xffff]
[ 0.457752] pci_bus 0000:02: resource 1 [mem 0xfcc00000-0xfcdfffff]
[ 0.457753] pci_bus 0000:07: resource 1 [mem 0xfcd00000-0xfcdfffff]
[ 0.457754] pci_bus 0000:08: resource 0 [io 0xf000-0xffff]
[ 0.457755] pci_bus 0000:08: resource 1 [mem 0xfcc00000-0xfccfffff]
[ 0.457756] pci_bus 0000:09: resource 0 [io 0xe000-0xefff]
[ 0.457757] pci_bus 0000:09: resource 1 [mem 0xfc800000-0xfcbfffff]
[ 0.457758] pci_bus 0000:09: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref]
[ 0.457759] pci_bus 0000:0a: resource 1 [mem 0xfcf00000-0xfcffffff]
[ 0.457982] pci 0000:01:00.0: CLS mismatch (64 != 484), using 64 bytes
[ 0.458000] pci 0000:09:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.458021] pci 0000:09:00.1: D0 power state depends on 0000:09:00.0
[ 0.458027] pci 0000:09:00.3: extending delay after power-on from D3hot to 20 msec
[ 0.458240] pci 0000:09:00.4: extending delay after power-on from D3hot to 20 msec
[ 0.458335] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[ 0.458372] pci 0000:00:00.2: can't derive routing for PCI INT A
[ 0.458374] pci 0000:00:00.2: PCI INT A: not connected
[ 0.458377] AMD-Vi: Lazy IO/TLB flushing enabled
[ 0.458390] Trying to unpack rootfs image as initramfs...
[ 0.458396] pci 0000:00:01.0: Adding to iommu group 0
[ 0.458406] pci 0000:00:01.2: Adding to iommu group 1
[ 0.458422] pci 0000:00:08.0: Adding to iommu group 2
[ 0.458431] pci 0000:00:08.1: Adding to iommu group 3
[ 0.458442] pci 0000:00:08.2: Adding to iommu group 4
[ 0.458456] pci 0000:00:14.0: Adding to iommu group 5
[ 0.458465] pci 0000:00:14.3: Adding to iommu group 5
[ 0.458499] pci 0000:00:18.0: Adding to iommu group 6
[ 0.458506] pci 0000:00:18.1: Adding to iommu group 6
[ 0.458513] pci 0000:00:18.2: Adding to iommu group 6
[ 0.458521] pci 0000:00:18.3: Adding to iommu group 6
[ 0.458529] pci 0000:00:18.4: Adding to iommu group 6
[ 0.458536] pci 0000:00:18.5: Adding to iommu group 6
[ 0.458543] pci 0000:00:18.6: Adding to iommu group 6
[ 0.458550] pci 0000:00:18.7: Adding to iommu group 6
[ 0.458571] pci 0000:01:00.0: Adding to iommu group 7
[ 0.458581] pci 0000:01:00.1: Adding to iommu group 7
[ 0.458605] pci 0000:01:00.2: Adding to iommu group 7
[ 0.458608] pci 0000:02:00.0: Adding to iommu group 7
[ 0.458611] pci 0000:02:04.0: Adding to iommu group 7
[ 0.458616] pci 0000:02:06.0: Adding to iommu group 7
[ 0.458619] pci 0000:02:07.0: Adding to iommu group 7
[ 0.458622] pci 0000:02:08.0: Adding to iommu group 7
[ 0.458626] pci 0000:02:09.0: Adding to iommu group 7
[ 0.458629] pci 0000:07:00.0: Adding to iommu group 7
[ 0.458633] pci 0000:08:00.0: Adding to iommu group 7
[ 0.458669] pci 0000:09:00.0: Adding to iommu group 8
[ 0.458698] pci 0000:09:00.1: Adding to iommu group 9
[ 0.458719] pci 0000:09:00.2: Adding to iommu group 9
[ 0.458734] pci 0000:09:00.3: Adding to iommu group 9
[ 0.458748] pci 0000:09:00.4: Adding to iommu group 9
[ 0.458762] pci 0000:09:00.6: Adding to iommu group 9
[ 0.458772] pci 0000:0a:00.0: Adding to iommu group 10
[ 0.461469] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[ 0.461473] AMD-Vi: Extended features (0x4f77ef22294ada): PPR NX GT IA GA PC GA_vAPIC
[ 0.461477] AMD-Vi: Interrupt remapping enabled
[ 0.461477] AMD-Vi: Virtual APIC enabled
[ 0.461681] amd_uncore: 4 amd_df counters detected
[ 0.461687] amd_uncore: 6 amd_l3 counters detected
[ 0.462291] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[ 0.464158] Initialise system trusted keyrings
[ 0.464234] Key type blacklist registered
[ 0.464354] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 0.465720] zbud: loaded
[ 0.466442] integrity: Platform Keyring initialized
[ 0.474621] NET: Registered PF_ALG protocol family
[ 0.474622] xor: automatically using best checksumming function avx
[ 0.474624] Key type asymmetric registered
[ 0.474625] Asymmetric key parser 'x509' registered
[ 0.474632] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.474666] io scheduler mq-deadline registered
[ 0.474667] io scheduler kyber registered
[ 0.474691] io scheduler bfq registered
[ 0.475021] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 0.476507] pcieport 0000:00:01.2: PME: Signaling with IRQ 26
[ 0.476585] pcieport 0000:00:01.2: AER: enabled with IRQ 26
[ 0.476754] pcieport 0000:00:08.1: PME: Signaling with IRQ 27
[ 0.476983] pcieport 0000:00:08.2: PME: Signaling with IRQ 28
[ 0.477034] pcieport 0000:00:08.2: AER: enabled with IRQ 28
[ 0.478235] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.478337] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.478352] ACPI: button: Power Button [PWRB]
[ 0.478377] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.478406] ACPI: button: Power Button [PWRF]
[ 0.478444] Monitor-Mwait will be used to enter C-1 state
[ 0.478448] ACPI: \_SB_.PLTF.C000: Found 2 idle states
[ 0.478523] ACPI: \_SB_.PLTF.C002: Found 2 idle states
[ 0.478575] ACPI: \_SB_.PLTF.C004: Found 2 idle states
[ 0.478627] ACPI: \_SB_.PLTF.C006: Found 2 idle states
[ 0.478689] ACPI: \_SB_.PLTF.C001: Found 2 idle states
[ 0.478765] ACPI: \_SB_.PLTF.C003: Found 2 idle states
[ 0.478855] ACPI: \_SB_.PLTF.C005: Found 2 idle states
[ 0.478911] ACPI: \_SB_.PLTF.C007: Found 2 idle states
[ 0.799204] Freeing initrd memory: 45120K
[ 1.506269] tsc: Refined TSC clocksource calibration: 3596.262 MHz
[ 1.506296] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33d687bce15, max_idle_ns: 440795205952 ns
[ 1.506343] clocksource: Switched to clocksource tsc
[ 2.137990] clocksource: timekeeping watchdog on CPU3: Marking clocksource 'tsc' as unstable because the skew is too large:
[ 2.137999] clocksource: 'hpet' wd_nsec: 496297643 wd_now: 1be421d wd_last: 151d3fe mask: ffffffff
[ 2.138003] clocksource: 'tsc' cs_nsec: 495882053 cs_now: 3f6a900e24 cs_last: 3f0044b9bc mask: ffffffffffffffff
[ 2.138006] clocksource: 'tsc' is current clocksource.
[ 2.138008] tsc: Marking TSC unstable due to clocksource watchdog
[ 2.138230] clocksource: Checking clocksource tsc synchronization from CPU 5 to CPUs 0.
[ 2.138309] clocksource: Switched to clocksource hpet
[ 2.531666] ACPI: \_TZ_.TZ10: Invalid passive threshold
[ 2.531931] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.531933] ACPI: thermal: Thermal Zone [TZ10] (17 C)
[ 2.532318] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 2.532419] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 2.535090] Non-volatile memory driver v1.3
[ 2.535118] Linux agpgart interface v0.103
[ 2.536557] ahci 0000:01:00.1: version 3.0
[ 2.536685] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
[ 2.536753] ahci 0000:01:00.1: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 2.536755] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[ 2.537372] scsi host0: ahci
[ 2.537592] scsi host1: ahci
[ 2.537770] scsi host2: ahci
[ 2.537904] scsi host3: ahci
[ 2.538106] scsi host4: ahci
[ 2.538284] scsi host5: ahci
[ 2.538363] ata1: SATA max UDMA/133 abar m131072@0xfce80000 port 0xfce80100 irq 40
[ 2.538367] ata2: SATA max UDMA/133 abar m131072@0xfce80000 port 0xfce80180 irq 40
[ 2.538369] ata3: SATA max UDMA/133 abar m131072@0xfce80000 port 0xfce80200 irq 40
[ 2.538372] ata4: SATA max UDMA/133 abar m131072@0xfce80000 port 0xfce80280 irq 40
[ 2.538374] ata5: SATA max UDMA/133 abar m131072@0xfce80000 port 0xfce80300 irq 40
[ 2.538377] ata6: SATA max UDMA/133 abar m131072@0xfce80000 port 0xfce80380 irq 40
[ 2.548778] ahci 0000:0a:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x2 impl SATA mode
[ 2.548787] ahci 0000:0a:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
[ 2.549380] scsi host6: ahci
[ 2.549661] scsi host7: ahci
[ 2.549738] ata7: DUMMY
[ 2.549747] ata8: SATA max UDMA/133 abar m2048@0xfcf00000 port 0xfcf00180 irq 43
[ 2.549938] libphy: Fixed MDIO Bus: probed
[ 2.550101] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.550104] ehci-pci: EHCI PCI platform driver
[ 2.550116] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.550118] ohci-pci: OHCI PCI platform driver
[ 2.550125] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.550226] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 2.550277] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 2.647419] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410
[ 2.647623] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.14
[ 2.647625] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.647627] usb usb1: Product: xHCI Host Controller
[ 2.647628] usb usb1: Manufacturer: Linux 5.14.18-200.fc34.x86_64 xhci-hcd
[ 2.647629] usb usb1: SerialNumber: 0000:01:00.0
[ 2.647771] hub 1-0:1.0: USB hub found
[ 2.647787] hub 1-0:1.0: 10 ports detected
[ 2.648112] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 2.648166] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 2.648169] xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 2.648210] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.648244] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.14
[ 2.648248] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.648254] usb usb2: Product: xHCI Host Controller
[ 2.648256] usb usb2: Manufacturer: Linux 5.14.18-200.fc34.x86_64 xhci-hcd
[ 2.648259] usb usb2: SerialNumber: 0000:01:00.0
[ 2.648376] hub 2-0:1.0: USB hub found
[ 2.648384] hub 2-0:1.0: 4 ports detected
[ 2.648602] xhci_hcd 0000:09:00.3: xHCI Host Controller
[ 2.648643] xhci_hcd 0000:09:00.3: new USB bus registered, assigned bus number 3
[ 2.648826] xhci_hcd 0000:09:00.3: hcc params 0x0270ffe5 hci version 0x110 quirks 0x0000000840000410
[ 2.649322] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.14
[ 2.649324] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.649325] usb usb3: Product: xHCI Host Controller
[ 2.649326] usb usb3: Manufacturer: Linux 5.14.18-200.fc34.x86_64 xhci-hcd
[ 2.649327] usb usb3: SerialNumber: 0000:09:00.3
[ 2.649404] hub 3-0:1.0: USB hub found
[ 2.649412] hub 3-0:1.0: 4 ports detected
[ 2.649761] xhci_hcd 0000:09:00.3: xHCI Host Controller
[ 2.649794] xhci_hcd 0000:09:00.3: new USB bus registered, assigned bus number 4
[ 2.649796] xhci_hcd 0000:09:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[ 2.649822] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.649835] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.14
[ 2.649837] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.649838] usb usb4: Product: xHCI Host Controller
[ 2.649839] usb usb4: Manufacturer: Linux 5.14.18-200.fc34.x86_64 xhci-hcd
[ 2.649839] usb usb4: SerialNumber: 0000:09:00.3
[ 2.649907] hub 4-0:1.0: USB hub found
[ 2.649915] hub 4-0:1.0: 4 ports detected
[ 2.650326] xhci_hcd 0000:09:00.4: xHCI Host Controller
[ 2.650384] xhci_hcd 0000:09:00.4: new USB bus registered, assigned bus number 5
[ 2.650550] xhci_hcd 0000:09:00.4: hcc params 0x0260ffe5 hci version 0x110 quirks 0x0000000840000410
[ 2.650981] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.14
[ 2.650983] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.650984] usb usb5: Product: xHCI Host Controller
[ 2.650985] usb usb5: Manufacturer: Linux 5.14.18-200.fc34.x86_64 xhci-hcd
[ 2.650985] usb usb5: SerialNumber: 0000:09:00.4
[ 2.651060] hub 5-0:1.0: USB hub found
[ 2.651065] hub 5-0:1.0: 1 port detected
[ 2.651171] xhci_hcd 0000:09:00.4: xHCI Host Controller
[ 2.651201] xhci_hcd 0000:09:00.4: new USB bus registered, assigned bus number 6
[ 2.651203] xhci_hcd 0000:09:00.4: Host supports USB 3.1 Enhanced SuperSpeed
[ 2.651229] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.651243] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.14
[ 2.651244] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.651245] usb usb6: Product: xHCI Host Controller
[ 2.651245] usb usb6: Manufacturer: Linux 5.14.18-200.fc34.x86_64 xhci-hcd
[ 2.651246] usb usb6: SerialNumber: 0000:09:00.4
[ 2.651313] hub 6-0:1.0: USB hub found
[ 2.651317] hub 6-0:1.0: 1 port detected
[ 2.651399] usbcore: registered new interface driver usbserial_generic
[ 2.651402] usbserial: USB Serial support registered for generic
[ 2.651415] i8042: PNP: No PS/2 controller found.
[ 2.651449] mousedev: PS/2 mouse device common for all mice
[ 2.651554] rtc_cmos 00:02: RTC can wake from S4
[ 2.651881] rtc_cmos 00:02: registered as rtc0
[ 2.652191] rtc_cmos 00:02: setting system clock to 2021-11-25T06:07:41 UTC (1637820461)
[ 2.652202] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.652228] device-mapper: uevent: version 1.0.3
[ 2.652288] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[ 2.652542] hid: raw HID events driver (C) Jiri Kosina
[ 2.652563] usbcore: registered new interface driver usbhid
[ 2.652563] usbhid: USB HID core driver
[ 2.652654] drop_monitor: Initializing network drop monitor service
[ 2.652707] Initializing XFRM netlink socket
[ 2.652805] NET: Registered PF_INET6 protocol family
[ 2.656443] Segment Routing with IPv6
[ 2.656444] RPL Segment Routing with IPv6
[ 2.656459] mip6: Mobile IPv6
[ 2.656460] NET: Registered PF_PACKET protocol family
[ 2.657228] microcode: CPU0: patch_level=0x08101016
[ 2.657243] microcode: CPU1: patch_level=0x08101016
[ 2.657255] microcode: CPU2: patch_level=0x08101016
[ 2.657266] microcode: CPU3: patch_level=0x08101016
[ 2.657276] microcode: CPU4: patch_level=0x08101016
[ 2.657279] microcode: CPU5: patch_level=0x08101016
[ 2.657292] microcode: CPU6: patch_level=0x08101016
[ 2.657304] microcode: CPU7: patch_level=0x08101016
[ 2.657307] microcode: Microcode Update Driver: v2.2.
[ 2.657311] IPI shorthand broadcast: enabled
[ 2.657315] AVX2 version of gcm_enc/dec engaged.
[ 2.657554] AES CTR mode by8 optimization enabled
[ 2.675763] registered taskstats version 1
[ 2.676060] Loading compiled-in X.509 certificates
[ 2.676874] Loaded X.509 cert 'Fedora kernel signing key: de00dd1ac5279cbce2c74deb9cfbbb2b51786bf0'
[ 2.677158] zswap: loaded using pool lzo/zbud
[ 2.677297] page_owner is disabled
[ 2.677364] Key type ._fscrypt registered
[ 2.677365] Key type .fscrypt registered
[ 2.677366] Key type fscrypt-provisioning registered
[ 2.677856] Btrfs loaded, crc32c=crc32c-generic, zoned=yes
[ 2.677973] Key type big_key registered
[ 2.680538] Key type encrypted registered
[ 2.680545] ima: No TPM chip found, activating TPM-bypass!
[ 2.680588] Loading compiled-in module X.509 certificates
[ 2.681351] Loaded X.509 cert 'Fedora kernel signing key: de00dd1ac5279cbce2c74deb9cfbbb2b51786bf0'
[ 2.681353] ima: Allocated hash algorithm: sha256
[ 2.681363] ima: No architecture policies found
[ 2.681373] evm: Initialising EVM extended attributes:
[ 2.681374] evm: security.selinux
[ 2.681375] evm: security.SMACK64 (disabled)
[ 2.681376] evm: security.SMACK64EXEC (disabled)
[ 2.681377] evm: security.SMACK64TRANSMUTE (disabled)
[ 2.681378] evm: security.SMACK64MMAP (disabled)
[ 2.681378] evm: security.apparmor (disabled)
[ 2.681379] evm: security.ima
[ 2.681380] evm: security.capability
[ 2.681381] evm: HMAC attrs: 0x1
[ 2.681707] PM: Magic number: 13:608:115
[ 2.681901] RAS: Correctable Errors collector initialized.
[ 2.681913] Unstable clock detected, switching default tracing clock to "global"
If you want to keep using the local clock, then add:
"trace_clock=local"
on the kernel command line
[ 2.954308] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[ 3.002283] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.010283] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.017221] ata8.00: ATA-9: TS120GMTS820S, R0302A0, max UDMA/133
[ 3.017227] ata8.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 3.033425] ata1.00: ATA-10: ADATA SU650, V8X01c45, max UDMA/133
[ 3.033431] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 3.033816] ata8.00: configured for UDMA/133
[ 3.078089] ata1.00: configured for UDMA/133
[ 3.078422] scsi 0:0:0:0: Direct-Access ATA ADATA SU650 1c45 PQ: 0 ANSI: 5
[ 3.078739] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.078808] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 3.078820] sd 0:0:0:0: [sda] Write Protect is off
[ 3.078822] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.078841] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.080063] sda: sda1
[ 3.088071] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.377503] usb 1-1: New USB device found, idVendor=0b0e, idProduct=0300, bcdDevice= 3.08
[ 3.377512] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.377515] usb 1-1: Product: Jabra EVOLVE 20 MS
[ 3.377518] usb 1-1: Manufacturer: GN Netcom A/S
[ 3.377520] usb 1-1: SerialNumber: 00017BC8C02E0A
[ 3.546277] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.584641] ata2.00: ATA-10: ST2000DM008-2FR102, 0001, max UDMA/133
[ 3.584650] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 3.608299] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[ 3.635560] ata2.00: configured for UDMA/133
[ 3.635882] scsi 1:0:0:0: Direct-Access ATA ST2000DM008-2FR1 0001 PQ: 0 ANSI: 5
[ 3.636259] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 3.636297] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 3.636301] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 3.636310] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.636312] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.636331] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.653131] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.926715] usb 1-2: New USB device found, idVendor=0bda, idProduct=525e, bcdDevice=58.01
[ 3.926724] usb 1-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 3.926727] usb 1-2: Product: USB Camera
[ 3.926730] usb 1-2: Manufacturer: SSD
[ 3.926732] usb 1-2: SerialNumber: 200901010001
[ 4.098276] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4.099215] ata3.00: ATA-8: ST1000DM010-2EP102, CC43, max UDMA/133
[ 4.099219] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 4.100198] ata3.00: configured for UDMA/133
[ 4.100432] scsi 2:0:0:0: Direct-Access ATA ST1000DM010-2EP1 CC43 PQ: 0 ANSI: 5
[ 4.100761] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 4.100785] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 4.100788] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[ 4.100801] sd 2:0:0:0: [sdc] Write Protect is off
[ 4.100803] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 4.100826] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.121322] usb 1-5: new full-speed USB device number 4 using xhci_hcd
[ 4.153373] sdc: sdc1
[ 4.163092] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 4.410722] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.423471] usb 1-5: New USB device found, idVendor=258a, idProduct=002a, bcdDevice=90.36
[ 4.423477] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.423479] usb 1-5: Product: Gaming KB
[ 4.423481] usb 1-5: Manufacturer: SINO WEALTH
[ 4.449923] input: SINO WEALTH Gaming KB as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-5/1-5:1.0/0003:258A:002A.0002/input/input2
[ 4.502674] hid-generic 0003:258A:002A.0002: input,hidraw0: USB HID v1.11 Keyboard [SINO WEALTH Gaming KB ] on usb-0000:01:00.0-5/input0
[ 4.535306] input: SINO WEALTH Gaming KB System Control as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-5/1-5:1.1/0003:258A:002A.0003/input/input3
[ 4.587516] input: SINO WEALTH Gaming KB Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-5/1-5:1.1/0003:258A:002A.0003/input/input4
[ 4.587620] input: SINO WEALTH Gaming KB Keyboard as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-5/1-5:1.1/0003:258A:002A.0003/input/input5
[ 4.587824] hid-generic 0003:258A:002A.0003: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [SINO WEALTH Gaming KB ] on usb-0000:01:00.0-5/input1
[ 4.724747] ata5: SATA link down (SStatus 0 SControl 330)
[ 4.764308] usb 1-6: new low-speed USB device number 5 using xhci_hcd
[ 5.031734] ata6: SATA link down (SStatus 0 SControl 330)
[ 5.032169] scsi 7:0:0:0: Direct-Access ATA TS120GMTS820S 2A0 PQ: 0 ANSI: 5
[ 5.032501] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 5.032508] sd 7:0:0:0: [sdd] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 5.032525] sd 7:0:0:0: [sdd] Write Protect is off
[ 5.032527] sd 7:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 5.032551] sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.033396] sdd: sdd1 sdd2
[ 5.040131] sd 7:0:0:0: [sdd] Attached SCSI disk
[ 5.042333] Freeing unused decrypted memory: 2036K
[ 5.042739] Freeing unused kernel image (initmem) memory: 2872K
[ 5.042742] Write protecting the kernel read-only data: 28672k
[ 5.043299] Freeing unused kernel image (text/rodata gap) memory: 2036K
[ 5.043416] Freeing unused kernel image (rodata/data gap) memory: 180K
[ 5.064248] usb 1-6: New USB device found, idVendor=18f8, idProduct=0f97, bcdDevice= 1.00
[ 5.064256] usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 5.064259] usb 1-6: Product: USB OPTICAL MOUSE
[ 5.074647] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 5.074651] rodata_test: all tests were successful
[ 5.074657] Run /init as init process
[ 5.074658] with arguments:
[ 5.074658] /init
[ 5.074659] rhgb
[ 5.074659] with environment:
[ 5.074660] HOME=/
[ 5.074660] TERM=linux
[ 5.074661] BOOT_IMAGE=(hd0,msdos1)/vmlinuz-5.14.18-200.fc34.x86_64
[ 5.083183] systemd[1]: systemd v248.9-1.fc34 running in system mode. (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 5.088463] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-6/1-6:1.0/0003:18F8:0F97.0004/input/input6
[ 5.088527] hid-generic 0003:18F8:0F97.0004: input,hidraw2: USB HID v1.10 Mouse [USB OPTICAL MOUSE ] on usb-0000:01:00.0-6/input0
[ 5.095014] systemd[1]: Detected architecture x86-64.
[ 5.095019] systemd[1]: Running in initial RAM disk.
[ 5.095059] systemd[1]: Hostname set to <dev-station>.
[ 5.108310] input: USB OPTICAL MOUSE Keyboard as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-6/1-6:1.1/0003:18F8:0F97.0005/input/input7
[ 5.159909] systemd[1]: Queued start job for default target Initrd Default Target.
[ 5.160075] hid-generic 0003:18F8:0F97.0005: input,hiddev97,hidraw3: USB HID v1.10 Keyboard [USB OPTICAL MOUSE ] on usb-0000:01:00.0-6/input1
[ 5.160759] systemd[1]: Created slice Slice /system/systemd-cryptsetup.
[ 5.160900] systemd[1]: Reached target Local File Systems.
[ 5.160972] systemd[1]: Reached target Slice Units.
[ 5.161025] systemd[1]: Reached target Swaps.
[ 5.161072] systemd[1]: Reached target Timer Units.
[ 5.161185] systemd[1]: Listening on D-Bus System Message Bus Socket.
[ 5.161353] systemd[1]: Listening on Journal Audit Socket.
[ 5.161462] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.161600] systemd[1]: Listening on Journal Socket.
[ 5.161716] systemd[1]: Listening on udev Control Socket.
[ 5.161816] systemd[1]: Listening on udev Kernel Socket.
[ 5.161877] systemd[1]: Reached target Socket Units.
[ 5.162540] systemd[1]: Starting Create List of Static Device Nodes...
[ 5.162592] systemd[1]: Condition check resulted in Memstrack Anylazing Service being skipped.
[ 5.164152] systemd[1]: Starting Journal Service...
[ 5.164870] systemd[1]: Starting Load Kernel Modules...
[ 5.164920] systemd[1]: Condition check resulted in Create System Users being skipped.
[ 5.165627] systemd[1]: Starting Setup Virtual Console...
[ 5.166332] systemd[1]: Finished Create List of Static Device Nodes.
[ 5.167259] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 5.172146] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 5.206320] fuse: init (API version 7.34)
[ 5.211122] IPMI message handler: version 39.2
[ 5.212820] ipmi device interface
[ 5.217596] ipmi_si: IPMI System Interface driver
[ 5.217647] ipmi_si: Unable to find any System Interface(s)
[ 5.238183] systemd[1]: Started Journal Service.
[ 5.238274] audit: type=1130 audit(1637820464.085:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.243379] audit: type=1130 audit(1637820464.090:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.246459] audit: type=1130 audit(1637820464.093:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.255155] audit: type=1130 audit(1637820464.102:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.258842] audit: type=1130 audit(1637820464.105:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline-ask comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.261539] audit: type=1130 audit(1637820464.108:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.331801] audit: type=1130 audit(1637820464.178:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.336859] usb 1-9: new full-speed USB device number 6 using xhci_hcd
[ 5.350609] audit: type=1130 audit(1637820464.197:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.351506] audit: type=1334 audit(1637820464.198:10): prog-id=6 op=LOAD
[ 5.351625] audit: type=1334 audit(1637820464.198:11): prog-id=7 op=LOAD
[ 5.351707] audit: type=1334 audit(1637820464.198:12): prog-id=8 op=LOAD
[ 5.365177] audit: type=1130 audit(1637820464.212:13): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.460558] audit: type=1130 audit(1637820464.307:14): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.467103] ACPI: video: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 5.467383] acpi device:10: registered as cooling_device8
[ 5.467426] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0f/LNXVIDEO:01/input/input9
[ 5.478483] audit: type=1130 audit(1637820464.325:15): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.498734] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 5.532791] ccp 0000:09:00.2: ccp enabled
[ 5.539488] libphy: r8169: probed
[ 5.539735] r8169 0000:08:00.0 eth0: RTL8168h/8111h, 18:c0:4d:97:be:a5, XID 541, IRQ 65
[ 5.539741] r8169 0000:08:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 5.540062] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 5.540142] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
[ 5.540320] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[ 5.542972] ccp 0000:09:00.2: tee enabled
[ 5.542977] ccp 0000:09:00.2: psp enabled
[ 5.585607] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 5.608241] audit: type=1130 audit(1637820464.455:16): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-ask-password-plymouth comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.638853] r8169 0000:08:00.0 enp8s0: renamed from eth0
[ 5.706365] usb 1-9: New USB device found, idVendor=8087, idProduct=0aa7, bcdDevice= 0.01
[ 5.706370] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.901452] [drm] amdgpu kernel modesetting enabled.
[ 5.903965] usb 1-10: new full-speed USB device number 7 using xhci_hcd
[ 5.908405] amdgpu: Topology: Add APU node [0x0:0x0]
[ 5.908484] amdgpu 0000:09:00.0: vgaarb: deactivate vga console
[ 5.909697] Console: switching to colour dummy device 80x25
[ 5.909874] [drm] initializing kernel modesetting (RAVEN 0x1002:0x15DD 0x1458:0xD000 0xC6).
[ 5.909880] amdgpu 0000:09:00.0: amdgpu: Trusted Memory Zone (TMZ) feature enabled
[ 5.909896] [drm] register mmio base: 0xFCB00000
[ 5.909897] [drm] register mmio size: 524288
[ 5.909913] [drm] add ip block number 0 <soc15_common>
[ 5.909914] [drm] add ip block number 1 <gmc_v9_0>
[ 5.909915] [drm] add ip block number 2 <vega10_ih>
[ 5.909916] [drm] add ip block number 3 <psp>
[ 5.909918] [drm] add ip block number 4 <gfx_v9_0>
[ 5.909919] [drm] add ip block number 5 <sdma_v4_0>
[ 5.909920] [drm] add ip block number 6 <powerplay>
[ 5.909922] [drm] add ip block number 7 <dm>
[ 5.909923] [drm] add ip block number 8 <vcn_v1_0>
[ 5.935443] [drm] BIOS signature incorrect 5b 7
[ 5.935475] amdgpu 0000:09:00.0: amdgpu: Fetched VBIOS from ROM BAR
[ 5.935478] amdgpu: ATOM BIOS: 113-RAVEN-116
[ 5.936467] [drm] VCN decode is enabled in VM mode
[ 5.936469] [drm] VCN encode is enabled in VM mode
[ 5.936470] [drm] JPEG decode is enabled in VM mode
[ 5.936499] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[ 5.936506] amdgpu 0000:09:00.0: amdgpu: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
[ 5.936509] amdgpu 0000:09:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
[ 5.936511] amdgpu 0000:09:00.0: amdgpu: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[ 5.936516] [drm] Detected VRAM RAM=2048M, BAR=2048M
[ 5.936517] [drm] RAM width 128bits DDR4
[ 5.936549] [drm] amdgpu: 2048M of VRAM memory ready
[ 5.936551] [drm] amdgpu: 3072M of GTT memory ready.
[ 5.936556] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 5.936687] [drm] PCIE GART of 1024M enabled.
[ 5.936688] [drm] PTB located at 0x000000F400900000
[ 5.941999] amdgpu 0000:09:00.0: amdgpu: PSP runtime database doesn't exist
[ 5.953311] amdgpu: hwmgr_sw_init smu backed is smu10_smu
[ 5.970585] [drm] Found VCN firmware Version ENC: 1.13 DEC: 2 VEP: 0 Revision: 2
[ 5.970595] amdgpu 0000:09:00.0: amdgpu: Will use PSP to load VCN firmware
[ 5.991437] [drm] reserve 0x400000 from 0xf47fc00000 for PSP TMR
[ 6.050424] amdgpu 0000:09:00.0: amdgpu: RAS: optional ras ta ucode is not available
[ 6.055091] amdgpu 0000:09:00.0: amdgpu: RAP: optional rap ta ucode is not available
[ 6.055093] amdgpu 0000:09:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
[ 6.057151] [drm] kiq ring mec 2 pipe 1 q 0
[ 6.057550] [drm] DM_PPLIB: values for F clock
[ 6.057552] [drm] DM_PPLIB: 400000 in kHz, 3649 in mV
[ 6.057553] [drm] DM_PPLIB: 933000 in kHz, 4074 in mV
[ 6.057554] [drm] DM_PPLIB: 1067000 in kHz, 4250 in mV
[ 6.057555] [drm] DM_PPLIB: values for DCF clock
[ 6.057556] [drm] DM_PPLIB: 300000 in kHz, 3649 in mV
[ 6.057556] [drm] DM_PPLIB: 600000 in kHz, 4074 in mV
[ 6.057557] [drm] DM_PPLIB: 626000 in kHz, 4250 in mV
[ 6.057558] [drm] DM_PPLIB: 654000 in kHz, 4399 in mV
[ 6.057781] [drm] Display Core initialized with v3.2.141!
[ 6.100550] [drm] VCN decode and encode initialized successfully(under SPG Mode).
[ 6.101689] kfd kfd: amdgpu: Allocated 3969056 bytes on gart
[ 6.119098] memmap_init_zone_device initialised 524288 pages in 5ms
[ 6.119105] amdgpu: HMM registered 2048MB device memory
[ 6.119232] amdgpu: Topology: Add APU node [0x15dd:0x1002]
[ 6.119235] kfd kfd: amdgpu: added device 1002:15dd
[ 6.119250] amdgpu 0000:09:00.0: amdgpu: SE 1, SH per SE 1, CU per SH 11, active_cu_number 11
[ 6.120858] [drm] fb mappable at 0x40BCA000
[ 6.120859] [drm] vram apper at 0x40000000
[ 6.120860] [drm] size 8294400
[ 6.120860] [drm] fb depth is 24
[ 6.120861] [drm] pitch is 7680
[ 6.120929] fbcon: amdgpu (fb0) is primary device
[ 6.149229] Console: switching to colour frame buffer device 240x67
[ 6.169404] amdgpu 0000:09:00.0: [drm] fb0: amdgpu frame buffer device
[ 6.179048] amdgpu 0000:09:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0
[ 6.179052] amdgpu 0000:09:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[ 6.179054] amdgpu 0000:09:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[ 6.179055] amdgpu 0000:09:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
[ 6.179057] amdgpu 0000:09:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
[ 6.179058] amdgpu 0000:09:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
[ 6.179059] amdgpu 0000:09:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
[ 6.179060] amdgpu 0000:09:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
[ 6.179061] amdgpu 0000:09:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
[ 6.179063] amdgpu 0000:09:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
[ 6.179065] amdgpu 0000:09:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 1
[ 6.179066] amdgpu 0000:09:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 1
[ 6.179067] amdgpu 0000:09:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 1
[ 6.179069] amdgpu 0000:09:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 1
[ 6.179070] amdgpu 0000:09:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 1
[ 6.183018] [drm] Initialized amdgpu 3.42.0 20150101 for 0000:09:00.0 on minor 0
[ 6.289105] usb 1-10: New USB device found, idVendor=048d, idProduct=5702, bcdDevice= 0.01
[ 6.289111] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.289113] usb 1-10: Product: ITE Device
[ 6.289115] usb 1-10: Manufacturer: ITE Tech. Inc.
[ 6.305550] hid-generic 0003:048D:5702.0006: hiddev98,hidraw4: USB HID v1.12 Device [ITE Tech. Inc. ITE Device] on usb-0000:01:00.0-10/input0
[ 6.314921] input: GN Netcom A/S Jabra EVOLVE 20 MS as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.3/0003:0B0E:0300.0001/input/input10
[ 6.367168] jabra 0003:0B0E:0300.0001: input,hiddev99,hidraw5: USB HID v1.00 Device [GN Netcom A/S Jabra EVOLVE 20 MS] on usb-0000:01:00.0-1/input3
[ 18.131893] BTRFS: device label fedora_localhost-live devid 1 transid 766336 /dev/dm-0 scanned by systemd-udevd (883)
[ 18.146626] kauditd_printk_skb: 12 callbacks suppressed
[ 18.146629] audit: type=1130 audit(1637820476.993:29): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-cryptsetup@luks\x2de12cd2ce\x2df90e\x2d47a6\x2da7b5\x2dc2b17aeb068b comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 18.474815] audit: type=1130 audit(1637820477.321:30): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 18.492623] audit: type=1130 audit(1637820477.339:31): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 18.503659] BTRFS info (device dm-0): flagging fs with big metadata feature
[ 18.503666] BTRFS info (device dm-0): disk space caching is enabled
[ 18.503667] BTRFS info (device dm-0): has skinny extents
[ 18.544407] BTRFS info (device dm-0): enabling ssd optimizations
[ 18.565658] audit: type=1334 audit(1637820477.412:32): prog-id=11 op=UNLOAD
[ 18.565664] audit: type=1334 audit(1637820477.412:33): prog-id=10 op=UNLOAD
[ 18.565666] audit: type=1334 audit(1637820477.412:34): prog-id=9 op=UNLOAD
[ 18.566618] audit: type=1334 audit(1637820477.413:35): prog-id=14 op=UNLOAD
[ 18.566667] audit: type=1334 audit(1637820477.413:36): prog-id=13 op=UNLOAD
[ 18.566727] audit: type=1334 audit(1637820477.413:37): prog-id=12 op=UNLOAD
[ 18.668771] audit: type=1334 audit(1637820477.515:38): prog-id=15 op=LOAD
[ 18.843356] systemd-journald[297]: Received SIGTERM from PID 1 (systemd).
[ 19.028414] SELinux: policy capability network_peer_controls=1
[ 19.028418] SELinux: policy capability open_perms=1
[ 19.028419] SELinux: policy capability extended_socket_class=1
[ 19.028420] SELinux: policy capability always_check_network=0
[ 19.028421] SELinux: policy capability cgroup_seclabel=1
[ 19.028421] SELinux: policy capability nnp_nosuid_transition=1
[ 19.028422] SELinux: policy capability genfs_seclabel_symlinks=0
[ 19.063927] systemd[1]: Successfully loaded SELinux policy in 81.093ms.
[ 19.125896] systemd[1]: Relabelled /dev, /dev/shm, /run, /sys/fs/cgroup in 29.191ms.
[ 19.128736] systemd[1]: systemd v248.9-1.fc34 running in system mode. (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 19.140021] systemd[1]: Detected architecture x86-64.
[ 19.182017] systemd-sysv-generator[1002]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 19.182113] systemd-sysv-generator[1002]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 19.189030] systemd-sysv-generator[1002]: SysV service '/etc/rc.d/init.d/vmware-USBArbitrator' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 19.189169] systemd-sysv-generator[1002]: SysV service '/etc/rc.d/init.d/vmware' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 19.226280] zram: Added device: zram0
[ 19.458799] systemd[1]: initrd-switch-root.service: Deactivated successfully.
[ 19.459060] systemd[1]: Stopped Switch Root.
[ 19.459619] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[ 19.460130] systemd[1]: Created slice Virtual Machine and Container Slice.
[ 19.460447] systemd[1]: Created slice Slice /system/getty.
[ 19.460734] systemd[1]: Created slice Slice /system/modprobe.
[ 19.461088] systemd[1]: Created slice Slice /system/systemd-fsck.
[ 19.461388] systemd[1]: Created slice Slice /system/systemd-zram-setup.
[ 19.461918] systemd[1]: Created slice User and Session Slice.
[ 19.462013] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
[ 19.462180] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 19.462564] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 19.462683] systemd[1]: Reached target Block Device Preparation for /dev/mapper/luks-e12cd2ce-f90e-47a6-a7b5-c2b17aeb068b.
[ 19.462754] systemd[1]: Reached target Local Encrypted Volumes.
[ 19.462825] systemd[1]: Reached target Login Prompts.
[ 19.462866] systemd[1]: Stopped target Switch Root.
[ 19.462902] systemd[1]: Stopped target Initrd File Systems.
[ 19.462974] systemd[1]: Stopped target Initrd Root File System.
[ 19.463118] systemd[1]: Reached target Slice Units.
[ 19.463268] systemd[1]: Reached target Local Verity Integrity Protected Volumes.
[ 19.463641] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 19.464406] systemd[1]: Listening on LVM2 poll daemon socket.
[ 19.464586] systemd[1]: Listening on multipathd control socket.
[ 19.466369] systemd[1]: Listening on Process Core Dump Socket.
[ 19.466568] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 19.468014] systemd[1]: Listening on udev Control Socket.
[ 19.468346] systemd[1]: Listening on udev Kernel Socket.
[ 19.469169] systemd[1]: Listening on User Database Manager Socket.
[ 19.470568] systemd[1]: Mounting Huge Pages File System...
[ 19.471906] systemd[1]: Mounting POSIX Message Queue File System...
[ 19.473443] systemd[1]: Mounting Kernel Debug File System...
[ 19.474916] systemd[1]: Mounting Kernel Trace File System...
[ 19.475338] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 19.476845] systemd[1]: Starting Create List of Static Device Nodes...
[ 19.478103] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 19.479294] systemd[1]: Starting Load Kernel Module configfs...
[ 19.480437] systemd[1]: Starting Load Kernel Module drm...
[ 19.481638] systemd[1]: Starting Load Kernel Module fuse...
[ 19.482850] systemd[1]: Starting Preprocess NFS configuration convertion...
[ 19.483004] systemd[1]: plymouth-switch-root.service: Deactivated successfully.
[ 19.483088] systemd[1]: Stopped Plymouth switch root service.
[ 19.483836] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 19.483876] systemd[1]: systemd-fsck-root.service: Deactivated successfully.
[ 19.483931] systemd[1]: Stopped File System Check on Root Device.
[ 19.484074] systemd[1]: Stopped Journal Service.
[ 19.486378] systemd[1]: Starting Journal Service...
[ 19.488018] systemd[1]: Starting Load Kernel Modules...
[ 19.489387] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 19.489495] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
[ 19.490915] systemd[1]: Starting Coldplug All udev Devices...
[ 19.493585] systemd[1]: Mounted Huge Pages File System.
[ 19.493809] systemd[1]: Mounted POSIX Message Queue File System.
[ 19.493963] systemd[1]: Mounted Kernel Debug File System.
[ 19.494135] systemd[1]: Mounted Kernel Trace File System.
[ 19.494868] systemd[1]: Finished Create List of Static Device Nodes.
[ 19.495280] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 19.495575] systemd[1]: Finished Load Kernel Module configfs.
[ 19.495901] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 19.496160] systemd[1]: Finished Load Kernel Module drm.
[ 19.496476] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 19.496710] systemd[1]: Finished Load Kernel Module fuse.
[ 19.497320] systemd[1]: nfs-convert.service: Deactivated successfully.
[ 19.497589] systemd[1]: Finished Preprocess NFS configuration convertion.
[ 19.499611] systemd[1]: Mounting FUSE Control File System...
[ 19.500728] BTRFS info (device dm-0): use zstd compression, level 1
[ 19.500736] BTRFS info (device dm-0): disk space caching is enabled
[ 19.501301] systemd[1]: Mounting Kernel Configuration File System...
[ 19.504629] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 19.504889] systemd[1]: Mounted FUSE Control File System.
[ 19.505029] systemd[1]: Mounted Kernel Configuration File System.
[ 19.505187] systemd[1]: Condition check resulted in Special handling of early boot iSCSI sessions being skipped.
[ 19.505228] systemd[1]: Condition check resulted in OSTree Remount OS/ Bind Mounts being skipped.
[ 19.505282] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[ 19.506550] ipmi_si: IPMI System Interface driver
[ 19.506629] ipmi_si: Unable to find any System Interface(s)
[ 19.506731] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 19.508049] systemd[1]: Starting Load/Save Random Seed...
[ 19.508171] systemd[1]: Condition check resulted in Create System Users being skipped.
[ 19.509683] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 19.516594] systemd[1]: Started Journal Service.
[ 19.525822] systemd-journald[1023]: Received client request to flush runtime journal.
[ 20.014443] acpi_cpufreq: overriding BIOS provided _PSD data
[ 20.096517] mc: Linux media interface: v0.10
[ 20.161598] videodev: Linux video capture interface: v2.00
[ 20.235556] Bluetooth: Core ver 2.22
[ 20.235662] NET: Registered PF_BLUETOOTH protocol family
[ 20.235664] Bluetooth: HCI device and connection manager initialized
[ 20.235667] Bluetooth: HCI socket layer initialized
[ 20.235669] Bluetooth: L2CAP socket layer initialized
[ 20.235673] Bluetooth: SCO socket layer initialized
[ 20.251016] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 20.251796] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 20.262596] input: PC Speaker as /devices/platform/pcspkr/input/input11
[ 20.273417] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\GSA1.SMBI) (20210604/utaddress-204)
[ 20.273427] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 20.286034] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[ 20.286038] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 20.292717] usb 1-2: Found UVC 1.00 device USB Camera (0bda:525e)
[ 20.314577] usbcore: registered new interface driver btusb
[ 20.333763] Bluetooth: hci0: read Intel version: 370810225019140f00
[ 20.337093] zram0: detected capacity change from 0 to 16777216
[ 20.340425] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-22.50.19.14.f.bseq
[ 20.368578] input: USB Camera: USB Camera as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-2/1-2:1.0/input/input12
[ 20.368680] usbcore: registered new interface driver uvcvideo
[ 20.420645] Intel(R) Wireless WiFi driver for Linux
[ 20.431791] Adding 8388604k swap on /dev/zram0. Priority:100 extents:1 across:8388604k SSDscFS
[ 20.450118] snd_hda_intel 0000:09:00.1: Handle vga_switcheroo audio client
[ 20.470070] iwlwifi 0000:07:00.0: loaded firmware version 29.198743027.0 3168-29.ucode op_mode iwlmvm
[ 20.470247] snd_hda_intel 0000:09:00.1: bound 0000:09:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[ 20.471993] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:09:00.1/sound/card1/input13
[ 20.472099] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:09:00.1/sound/card1/input14
[ 20.472260] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:09:00.1/sound/card1/input15
[ 20.481693] BTRFS info (device dm-0): devid 1 device path /dev/mapper/luks-e12cd2ce-f90e-47a6-a7b5-c2b17aeb068b changed to /dev/dm-0 scanned by systemd-udevd (1044)
[ 20.483445] BTRFS info (device dm-0): devid 1 device path /dev/dm-0 changed to /dev/mapper/luks-e12cd2ce-f90e-47a6-a7b5-c2b17aeb068b scanned by systemd-udevd (1044)
[ 20.491874] kvm: Nested Virtualization enabled
[ 20.491878] SVM: kvm: Nested Paging enabled
[ 20.491881] SEV supported: 16 ASIDs
[ 20.491882] SEV-ES supported: 4294967295 ASIDs
[ 20.491918] SVM: Virtual VMLOAD VMSAVE supported
[ 20.491919] SVM: Virtual GIF supported
[ 20.513754] MCE: In-kernel MCE decoding enabled.
[ 20.515471] snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC897: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 20.515479] snd_hda_codec_realtek hdaudioC2D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 20.515481] snd_hda_codec_realtek hdaudioC2D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 20.515483] snd_hda_codec_realtek hdaudioC2D0: mono: mono_out=0x0
[ 20.515485] snd_hda_codec_realtek hdaudioC2D0: inputs:
[ 20.515486] snd_hda_codec_realtek hdaudioC2D0: Front Mic=0x19
[ 20.515488] snd_hda_codec_realtek hdaudioC2D0: Rear Mic=0x18
[ 20.515490] snd_hda_codec_realtek hdaudioC2D0: Line=0x1a
[ 20.547771] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card2/input16
[ 20.547841] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card2/input17
[ 20.547898] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card2/input18
[ 20.547977] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card2/input19
[ 20.548032] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card2/input20
[ 20.575723] intel_rapl_common: Found RAPL domain package
[ 20.575728] intel_rapl_common: Found RAPL domain core
[ 20.620272] iwlwifi 0000:07:00.0: Detected Intel(R) Dual Band Wireless AC 3168, REV=0x220
[ 20.626560] thermal thermal_zone1: failed to read out thermal zone (-61)
[ 20.638683] iwlwifi 0000:07:00.0: base HW address: 98:8d:46:84:44:0f
[ 20.664184] usb 1-2: current rate 48000 is different from the runtime rate 8000
[ 20.668115] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 20.674154] iwlwifi 0000:07:00.0 wlo1: renamed from wlan0
[ 20.879182] usb 1-2: current rate 48000 is different from the runtime rate 16000
[ 21.094165] usb 1-2: current rate 48000 is different from the runtime rate 44100
[ 21.525155] usb 1-2: current rate 48000 is different from the runtime rate 8000
[ 21.740151] usb 1-2: current rate 48000 is different from the runtime rate 16000
[ 21.848888] Bluetooth: hci0: Intel BT fw patch 0x42 completed & activated
[ 21.955142] usb 1-2: current rate 48000 is different from the runtime rate 44100
[ 22.424728] usbcore: registered new interface driver snd-usb-audio
[ 23.458637] kauditd_printk_skb: 86 callbacks suppressed
[ 23.458642] audit: type=1130 audit(1637820482.305:123): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 23.481082] loop: module loaded
[ 23.493986] loop0: detected capacity change from 0 to 1975688
[ 23.496056] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 23.497709] loop1: detected capacity change from 0 to 1975296
[ 23.498754] loop3: detected capacity change from 0 to 113656
[ 23.500171] loop2: detected capacity change from 0 to 8
[ 23.501818] loop6: detected capacity change from 0 to 126632
[ 23.502032] loop4: detected capacity change from 0 to 113640
[ 23.503220] loop5: detected capacity change from 0 to 126632
[ 23.513391] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 23.517870] loop8: detected capacity change from 0 to 448512
[ 23.519627] loop9: detected capacity change from 0 to 133320
[ 23.521868] loop7: detected capacity change from 0 to 448512
[ 23.524191] loop13: detected capacity change from 0 to 741888
[ 23.524819] loop11: detected capacity change from 0 to 133552
[ 23.526427] loop10: detected capacity change from 0 to 66440
[ 23.527889] loop12: detected capacity change from 0 to 741712
[ 23.527892] loop14: detected capacity change from 0 to 741424
[ 23.527894] loop15: detected capacity change from 0 to 86368
[ 23.529680] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 23.540900] loop16: detected capacity change from 0 to 46416
[ 23.552423] EXT4-fs (sdb): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 23.555851] loop17: detected capacity change from 0 to 46472
[ 23.658081] audit: type=1130 audit(1637820482.505:124): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-disk-by\x2duuid-3b98f06c\x2d1fe5\x2d4f16\x2db9ef\x2dbb91369197c3 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 23.706260] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 23.718250] audit: type=1130 audit(1637820482.565:125): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 23.741294] audit: type=1130 audit(1637820482.588:126): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 23.777182] audit: type=1130 audit(1637820482.624:127): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=import-state comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 23.858230] audit: type=1130 audit(1637820482.705:128): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 23.866367] audit: type=1334 audit(1637820482.713:129): prog-id=32 op=LOAD
[ 23.866748] audit: type=1334 audit(1637820482.713:130): prog-id=33 op=LOAD
[ 23.866899] audit: type=1334 audit(1637820482.713:131): prog-id=34 op=LOAD
[ 23.870620] audit: type=1334 audit(1637820482.717:132): prog-id=35 op=LOAD
[ 23.909775] RPC: Registered named UNIX socket transport module.
[ 23.909778] RPC: Registered udp transport module.
[ 23.909779] RPC: Registered tcp transport module.
[ 23.909779] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 24.225493] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 24.225497] Bluetooth: BNEP filters: protocol multicast
[ 24.225501] Bluetooth: BNEP socket layer initialized
[ 24.278983] vmmon: loading out-of-tree module taints kernel.
[ 24.279055] vmmon: module verification failed: signature and/or required key missing - tainting kernel
[ 24.280614] /dev/vmmon[1424]: Module vmmon: registered as misc device
[ 24.280620] /dev/vmmon[1424]: Using tsc_khz as TSC frequency: 3596262
[ 24.280621] /dev/vmmon[1424]: Module vmmon: initialized
[ 24.312725] Guest personality initialized and is inactive
[ 24.312840] VMCI host device registered (name=vmci, major=10, minor=123)
[ 24.312842] Initialized host personality
[ 24.331311] NET: Registered PF_VSOCK protocol family
[ 24.369143] ppdev: user-space parallel port driver
[ 29.661979] Generic FE-GE Realtek PHY r8169-0-800:00: attached PHY driver (mii_bus:phy_addr=r8169-0-800:00, irq=MAC)
[ 29.841084] r8169 0000:08:00.0 enp8s0: Link is Down
[ 30.035267] userif-2: sent link down event.
[ 30.035273] userif-2: sent link up event.
[ 34.322604] wlo1: authenticate with 54:37:bb:0f:d4:8d
[ 34.327292] wlo1: send auth to 54:37:bb:0f:d4:8d (try 1/3)
[ 34.328338] wlo1: authenticated
[ 34.330988] wlo1: associate with 54:37:bb:0f:d4:8d (try 1/3)
[ 34.333328] wlo1: RX AssocResp from 54:37:bb:0f:d4:8d (capab=0x1911 status=0 aid=3)
[ 34.334715] wlo1: associated
[ 34.474151] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 34.674810] userif-2: sent link down event.
[ 34.674818] userif-2: sent link up event.
[ 34.875727] userif-2: sent link down event.
[ 34.875733] userif-2: sent link up event.
[ 35.380622] userif-2: sent link down event.
[ 35.380630] userif-2: sent link up event.
[ 36.192496] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 36.802244] userif-2: sent link down event.
[ 36.802250] userif-2: sent link up event.
[ 39.770200] rfkill: input handler disabled
[ 40.859692] Bluetooth: RFCOMM TTY layer initialized
[ 40.859701] Bluetooth: RFCOMM socket layer initialized
[ 40.859779] Bluetooth: RFCOMM ver 1.11
[ 77.427846] rfkill: input handler enabled
[ 79.531237] rfkill: input handler disabled
I'm using Fedora 34... using Arduino Uno Rev3 and;
$ lsubs
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 8087:0aa7 Intel Corp. Wireless-AC 3168 Bluetooth
Bus 001 Device 005: ID 18f8:0f97 [Maxxter] Optical Gaming Mouse [Xtrem]
Bus 001 Device 004: ID 258a:002a SINO WEALTH Gaming KB
Bus 001 Device 003: ID 0bda:525e Realtek Semiconductor Corp. USB Camera
Bus 001 Device 007: ID 048d:5702 Integrated Technology Express, Inc. ITE Device
Bus 001 Device 002: ID 0b0e:0300 GN Netcom Jabra EVOLVE 20 MS
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
prior to this issue when i first plugged in my arduino and opened my IDE, there are tons of ports to select from, i knew i messed up when i selected /dev/ttyS0 instead of /dev/ttyUSB but i'm unable to select new port since this time it only shows /dev/ttyS0 which is strange on why the options for ports suddenly disappeared
Sorry that I missed which board you are using. What is the TTL-to-USB chip (closest to the USB port) on the Uno?
Did you use the same cable?
Using ttyS0 should not cause this problem (as far as my knowledge goes). It should simply have thrown an error when you attempt to upload.
TTL-to-USB chip is ATMEL MEGA 16U2 2046 TH 2046BS9
i did use the same cable tried other cable still the same
yeah, error on upload is...
Arduino: 1.8.13 (Linux), Board: "Arduino Uno"
Sketch uses 924 bytes (2%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x00
Problem uploading to board. See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
is there a way to forcefully change port? isn't the ttyS0 for serial and should the IDE allow me to switch to ttyACM or ttyUSB?
I'm afraid that I'm out of options.
Not without deeply hacking your Linux system; and I don't know how 
ttySx is indeed a serial port; ttyACMx is (officially) a modem but is the normal device for an Arduino Uno with 16U2. I don't have a Linux system at hand (and my Linux knowledge is rusty) but your lsusb does not seem to reveal an Uno; I guess the output does not change when you connect or disconnect the board.
Yes, if the Arduino is detected.
This topic was automatically closed 180 days after the last reply. New replies are no longer allowed.