Hello all Kind of a newbie here... :blush: Been playing with my Arduino Boards for a while. i have an UNO and a Duemilanove 328. I've been able to program both of them no problem for weeks. Any example project I try will compile and upload with no issue. I recently got an Ethernet shield...I'm t…

I have the same issue as reported here and same Ethernet shield as nephtyz. Did the removal of the capacitor nearest the reset button in the image from 20th Dec 2015 solve the issue?

I removed the Cap nearest the reset switch and my problems were solved. Thanks a lot, much frustration will now be avoided

nymrod: I have the same issue as reported here and same Ethernet shield as nephtyz. Did the removal of the capacitor nearest the reset button in the image from 20th Dec 2015 solve the issue? I have the same board , and same problem, did removing the (only) capacitor next to reset work?

broko1: I have the same board , and same problem, did removing the (only) capacitor next to reset work? Hi everybody. Quick solution that worked for me: cut (or bend out) the reset pin from the ethernet shield. No solder, no capacitor, nothing Now the long story: I had the ethernet shield wor…

acerbus: Hi everybody. Quick solution that worked for me: cut (or bend out) the reset pin from the ethernet shield. No solder, no capacitor, nothing Now the long story: I had the ethernet shield working fine on an Arduino nano, with only the minimum connections made with jump wires. When I migr…

I have the same problem. After speaking with the online shop "tuelectronica" ( Arduino Ethernet Shield - TuElectronica.es ) I have noticed that the shield use the com port, so that it is imposible use the serial to comunicate the pc and the Arduino Uno. It is posible with Mega for instance, there are …

I had this same problem except with the Motor Shield V2.3 and it turns out that I must have used too much solder when soldering the headers to the shield because two pins were shorted together. I wasnt able to see the short because the stacking headers cover the solder joint visible from the top of …

Bad Soldering (of ICSP) pins to SSD's socket, made shield (and arduino) go crazy. Same error on 2 different ethernet shields. Removed bad soldering and voila! problem solved!! [screenshot_496.jpg]

masterfull: Bad Soldering (of ICSP) pins to SSD's socket, made shield (and arduino) go crazy. Same error on 2 different ethernet shields. Removed bad soldering and voila! problem solved!! Thanks!!! the final attempt, the BEST...

I had exactly the same issue as everyone here. No trick helped until the last one - cleaning the bad quality soldering! I just scratch the "show circuit" out with a needle and bing - it started to work immediately! Several hours of my live wasted on trying to figure out what it was till I found thi…

Arduino code won't upload with Ethernet Shield attached...

Development Tools IDE 1.x

EtCeteralodz October 19, 2016, 8:33pm 36

Thanks!

Topic		Replies	Views
ethernet shield problem Networking, Protocols, and Devices	32	6367	August 10, 2018
Ethernet shield,Arduino UNO and 3 problems :) IDE 1.x	23	12447	March 9, 2015
Problem with ethernet shield on Arduino UNO Networking, Protocols, and Devices	26	9303	April 8, 2016
PROBLEM SOLVED - DEFECTIVE ARDURINO BOARD - I'm stumped. Can't upload any sketches to Uno or Mega, I could 9 years ago Uploading	23	546	May 7, 2026
anyone else got the uno+eth_sd from ebay us seller? (Problem fixed!) Networking, Protocols, and Devices	25	6658	May 5, 2012

Arduino code won't upload with Ethernet Shield attached...

Related topics