Arduino Nano Atmega328p not working

Official Hardware Nano Family Classic Nano
1

I have the Arduino Nano V3.0 Atmega328p clone, it hasn't been used for a while (about a year and a half or so) but it was working the last time I used it. I decided to use it again, but now it is no longer connecting to the computer. The red power light is on, the CH431 driver is installed, but when I connect and reconnect to the computer nothing happens.

My arduino (front and back) and my device manager on Win 11:

123
1231920×1832 281 KB

Is Arduino USB dead?

(NOTE: I tried putting it on the other linux computer, but it's the same thing, the USB is not reading/working on the PC)

2

you look to wrong category, it must be "port connection" or so

3

no matter the category, it doesn't even update the manager with this:
Sem título
to install the driver

4

open "Ports (COM&LPT)"

5

Don't heve.
Sem título

when I put Arduino MEGA appears, but only he, the nano doesn't.

6

Sem título

7

reinstall driver for CH431. if not helps. try on other PC.

8

This topic was automatically closed 180 days after the last reply. New replies are no longer allowed.