I just got this and can't get the code to upload. it says this: Binary sketch size: 1018 bytes (of a 14336 byte maximum) avrdude: stk500_getsync(): not in sync: resp=0x30 avrdude: stk500_disable(): protocol error, expect=0x14, resp=0x51 Any idea what's going on? ps. it's the blink example.

That was the first thing I tried. It didn't help. But i think i figured out the problem. Here is the new situation: the ftdi drivers will not install. windows seems to think it knows what drivers i need better than i do. it says windows has determined that drivers for "Unknown USB Device" are up to…

I just bought two Nano 3.0's (sn11BP0202, and 11BP0203). Same thing. No driver recognized. For either of them. I have an Arduino Uno which comes up fine. When I plug it in, all of a sudden /dev/tty.usbmodem411 shows up. Downloads work. Life is good. Plug in either of the Nanos and /dev/tty.usbmode…

Well, good news... (at least for me). I downloaded the latest FTDI drivers ( http://www.ftdichip.com/Drivers/VCP.htm ) and things got good. Interesting since my previous drivers were not that old. Both boards now load. Thanks for the forum and I hope this helps.

Good day! I’m doing a project using my arduino nano version 3.0 and I had encounter several problems regarding it.. Here are my problems: Why do every time I plug my arduino nano there’s no available port for it? Why don’t arduino nano have its own driver? Last, why every time I upload something…

Hi guys, I just found the easiest solution to INSTALLERS, FTDI, Software Updating and stuff. These guys from CZ just uploaded the driver for solving these issues on arduino Nano. Worked for me, hope it works for you. http://robotstore.cz/obchod/arduino/dccduino-nano-v3-0-atmega328-ch340g-arduino-ro…

So, just to help anyone else running Mountain Lion (10.8.5) and a Nano V3.0 ATmega328 CH340G: My system: Macbook Pro with 10.8.5 My Nano I got off EBay and it's full description is: Mini USB Nano V3.0 ATmega328 5V 16M Micro-controller CH340G board For Arduino So, I was able to get things to wor…

Hi - just got one of these: Mini USB Nano V3.0 ATmega328 5V 16M Micro-controller CH340G board For Arduino, - needs a CH340g driver - found one & brief description at Модуль CH340G. Переходник USB COM TTL (RS232). - It 's a zip file, opened & worked ok. This site also has drivers for Windows, Linux, …

I've tried the two European websites referenced for the Windows drivers for NANO. Norton is preventing me from installing from either. So I'm lost. I'm having the same issues as others: my Uno and Mega boards register cleanly and automatically but my Nano boards don't. Windows finds no drivers for t…

Start by posting a link to where you got them from so we can check which USB to serial chip it uses.

Arduino Nano v3.0

Development Tools IDE 1.x

mellis February 26, 2011, 4:49pm 2

Check the troubleshooting guide: http://www.arduino.cc/en/Guide/Troubleshooting#upload

Topic		Replies	Views
Arduino Nano avrdude error while uploading Uploading	18	310	November 27, 2025
Cannot program Nano v3.3 from Windows 11 system Classic Nano	25	210	March 22, 2026
Arduino nano ATmega328PB upload issue Uploading	47	1326	February 19, 2026
Arduino Nano Upload Error Uploading	30	1895	January 12, 2024
Arduino NANO sich nicht (mehr) programmieren Deutsch	69	957	November 3, 2025

Arduino Nano v3.0

Related topics