Arduino UNO WIFI Rev2

Development Tools Uploading
1

Hell members,

I am trying to 1st program this board using the cable. While there is communication, as the software can read it, I still can not write to it. I tried with the blink program.

avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x30
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x20
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x30
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x20
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x30
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x20
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x30
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x20
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x30
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x20
An error occurred while uploading the sketch

The codes above are generated. I have tried to follow that link, but to no avail.
I got different codes from different computers.

2nd I will like to program it through WIFI, but I have to pass the first hurdle.

Please help.

Mthulisi

2

What cable?
I don’t think that this board uses stk500, so your error messages are weird.

3

It looks like he selected Arduino Uno or Arduino Uno Wifi as the board from tools -> board.

These are different boards based on a different chip than the Arduino Uno Wifi Rev. 2 and will produce errors like the one you posted.

You need to install the megaAVR board package:
Tools -> Board -> Board Manager

Wait for it to load, click megaAVR board package, and click install.

Now you can select your Arduino Uno Wifi Rev. 2 from Tools -> Board menu.