Can you use a BTS7960 43A module as driver for a SPWM tranformer inverter

Hardware
1

Hi all,
I have a crazy idea, the BTS7960 43A is a PWM motor driver module. It's maximum PWM frequency is 25Khz, and the build in MOSFETS have a quite low RDSon. So I was wondering if I can use this module as a driver for a transformer to make a 12/24Vdc to 120Vac inverter.
I want to use an Arduino together with this module to create a 25KH SPWM driver for a standard transformer.
Let me know what you think of this idea and if this is possible or maybe why this is not a good idea. Has anyone seen this somewhere at the internet and can you give me some links.

Thanks

2

I did some playing with that Idea a few years back, nothing serious but it worked for me. I see no problems for you, it should work just fine. It will save you some problems and make the design easier. There is one quirk in the modules if the BTS7960 loses ground it can get blasted so be sure your grounds are solid.

3

This topic was automatically closed 180 days after the last reply. New replies are no longer allowed.