Connecting AS5600 through I2C

Official Hardware Nano Family Nano RP2040 Connect
3

Hi,
if I scan for I2C adresses, I find 0x60 and 0x6B.

I used the following schematic, without the screen. Arduino is Nano RP2040 Connect

image
image1572×742 116 KB

And want to use the following example code:

//
//    FILE: AS5600_position.ino
//  AUTHOR: Rob Tillaart
// PURPOSE: demo
//    DATE: 2022-12-20


#include "AS5600.h"
#include "Wire.h"

AS5600 as5600;   //  use default Wire


void setup()
{
  Serial.begin(115200);
  Serial.println(__FILE__);
  Serial.print("AS5600_LIB_VERSION: ");
  Serial.println(AS5600_LIB_VERSION);

  //  ESP32
  //  as5600.begin(14, 15);
  //  AVR
  as5600.begin(4);  //  set direction pin.
  as5600.setDirection(AS5600_CLOCK_WISE);  // default, just be explicit.

  Serial.println(as5600.getAddress());
  int b = as5600.isConnected();
  Serial.print("Connect: ");
  Serial.println(b);
  delay(1000);
}


void loop()
{
  static uint32_t lastTime = 0;
  Serial.print("test");
  //  set initial position
  as5600.getCumulativePosition();

  //  update every 100 ms
  //  should be enough up to ~200 RPM
  if (millis() - lastTime >= 100)
  {
    lastTime = millis();
    Serial.print(as5600.getCumulativePosition());
    Serial.print("\t");
    Serial.println(as5600.getRevolutions());
  }

  //  just to show how reset can be used
  if (as5600.getRevolutions() >= 10)
  {
    as5600.resetPosition();
  }
}


// -- END OF FILE --