Hello everyone - I am trying to figure out an odd issue with my NEMA 23 motor. I am using an Arduino Mega to control a NEMA 23 stepper motor ( https://s3.us-east-2.amazonaws.com/stepper-motor-driver/TB6600/MYSWEETY+TB6600+Stepper+Motor.pdf ) which in turn is driving a linear translocation stage (Optic…

The symptoms sounds exactly like those of a stepper motor that has some grit or swarf trapped in it. Steppers combine very fine tooth rotors with very small air gaps and strong magnetic fields. They need to be assembled in very clean conditions but sometimes a foreign body can get left inside or p…

Help - NEMA 23 stepper motor works fine for a few hours, then stalls and grinds

Other Hardware Motors, Mechanics, Power and CNC

rchairil September 22, 2022, 4:30am 7

My wiring is identical to the image in this setup.

The NEMA 23 motor is attached directly to the linear stage. Here is a datasheet containing schematics for the motor.

KL-5056-E driver and NEMA 23 motor with Arduino Mega help

Topic		Replies	Views
Troubleshooting stepper motor system General Guidance	22	3415	May 5, 2021
Program works great, motor works as predicted, then suddenly it deviates ??? Programming	12	3073	May 5, 2021
nema 23 stepper burned to a crisp Motors, Mechanics, Power and CNC	15	8159	May 6, 2021
Problems driving a Nema-23 76mm stepper motor General Guidance	15	13064	May 5, 2021
its possible a stepper go that fast? Motors, Mechanics, Power and CNC	26	6816	May 6, 2021

Help - NEMA 23 stepper motor works fine for a few hours, then stalls and grinds

Related topics