Hello everyone, I use Arduino Mega board and it at its ready state sends a group of letters "ADK". How to get rid of this message?

In the IDE, click on Edit, then on Copy For Forum, that will copy your code. Then come here and just do a paste.

[image] actitop: How to get rid of this message? o the best of my knowledge, that is not an Arduino system message. Based on the information provided, I’ll take a SWAG (Scientific Wild-Assumed Guess) and suggest that a Serial.print statement is responsible for it. This could be in your code o…

https://docs.arduino.cc/retired/boards/arduino-mega-adk-rev3/

I am puzzled how this link would help me with that annoying message. I looked through that description twice. Perhaps something useful is put between lines. I did not see that. I have difficulties as above with this one: Arduino Mega 2560 Pro Mini Board with CH340

If you upload the example blink sketch do you still see the message? If no: it was coming from the sketch you had loaded into the Mega. If yes: interesting...

No no no If you upload the example blink sketch do you still see the message? If no: it was coming from the sketch you had loaded into the Mega. If yes: [Spock - Fascinating!]

[image] actitop: How to get rid of this message? By posting your complete sketch through following this tutorial [image] Make experienced users help: two ways to quickly post code as a code-section Tutorials Hi newcomer, This thread wants to show you ho…

[image] hb1: I have difficulties as above with this one: Arduino Mega 2560 Pro Mini Board with CH340 Doesn't help as I get the message " Your access to this site has been limited by the site owner". What are you using? An Arduino Mega or an Arduino Mega ADK. If it's the latter, a better pl…

A link to the board I provided above. #5 [message] As though there are two programs are running. The first one that I loaded and second one lights the respective LEDs at Initial state. So, basically all the LEDs must be dark at initial state.

You'll have to provide all the details of the board that you showed in post #11; preferably schematic. If that board is not the Mega that you're talking about, you'll need to provide the wiring diagram of the connections between the board from post #11 and the Mega. Including power. You have been …

How to get rid of message "ADK"?

Projects Programming

StefanL38 November 23, 2024, 7:51am 8

By posting your complete sketch through following this tutorial

Topic		Replies	Views
Modifying arduino adk to mega 2022 IDE 1.x	1	485	April 19, 2022
Chinese Mega Clone not working Uploading	13	364	October 8, 2024
Have an issue with my Arduino Mega 2560 uploading code Uploading	6	122	June 1, 2025
Error when uploading Uploading	40	452	September 11, 2024
Az-Delivery AT2560 board werkt niet Nederlands	26	262	December 21, 2024

How to get rid of message "ADK"?

Related topics