An ATtiny85 is also an 8 pin DIP, and with the following sketch uploaded, will do as you've asked.
const byte output = 4; // PB4, ATtiny pin 3
const unsigned long second = 1000UL;
const unsigned long minute = 60UL * second;
const unsigned long hour = 60UL * minute;
const unsigned long onTime = 4 * hour;
const unsigned long offTime = 10 * minute;
void setup() {
pinMode(output, OUTPUT);
}
void loop() {
digitalWrite(output, HIGH);
delay(onTime);
digitalWrite(output, LOW);
delay(offTime);
}
You could of course use an ATmega328P, Uno, Nano, etc., etc.