Hi,
I am trying to figure out how to upload firmware and bin using windows.
This is what i need to upload in the board, but is a linux/unix command.
The windows commands are not the same.
I see 3 .bin file to uplad.
Any suggestion?
~/Library/Arduino15/packages/esp32/tools/esptool_py/2.6.1/esptool --chip esp32 --port /dev/cu.SLAB_USBtoUART --baud 115200 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size detect 0xe000 ~/Library/Arduino15/packages/esp32/hardware/esp32/1.0.2/tools/partitions/boot_app0.bin 0x1000 ~/Library/Arduino15/packages/esp32/hardware/esp32/1.0.2/tools/sdk/bin/bootloader_qio_80m.bin 0x10000 Ripple-915-Bluetooth.heltec_v2_wifi_lora_32.bin 0x8000 Ripple-915-Bluetooth.heltech_v2.partitions.bin