Hello guys. I have a problem with chinese clone of UNO on macOS Sierra 10.12.2 (16C67). IDE don't detects the port. I've read many information about same problem. But everywhere written about Sierra 10.12 or El Capitan.
I tried to install drivers like CH34x_Install_V1.3 and it's older version. I used commands like
sudo rm -rf /System/Library/Extensions/usb.kext
or
sudo rm -rf /Library/Extensions/usbserial.kext
before installing new version. Also tried command nvram boot-args="kext-dev-mode=1" and even "csrutil enable --without kext" from recovery mode. But nothing of these works for me.
Maybe anyone solved this problem?
I've encountered the same problem before, I solved it by installing these drivers.
Windows: http://www.wch.cn/download/CH341SER_EXE.html
Mac: CH341SER_MAC.ZIP - 南京沁恒微电子股份有限公司
Linux: http://www.wch.cn/download/CH341SER_LINUX_ZIP.html
My Arduino Blog:
aconcaguasci:
I've encountered the same problem before, I solved it by installing these drivers.Windows: http://www.wch.cn/download/CH341SER_EXE.html
Mac: CH341SER_MAC.ZIP - 南京沁恒微电子股份有限公司
Linux: CH341SER_LINUX.ZIP - 南京沁恒微电子股份有限公司My Arduino Blog:
http://aconcaguasci.blogspot.tw
Don't works for me unfortunately.
Problem solved. It was bad usb cable.