Hi. Can anyone help with the best way to convert the square wave signal to a dc voltage between 0v and 5v. I've attached the datasheet for reference. I'm trying to integrate this sensor into a old circuit that uses accelerometers that is like a voltage divider and sends the signal through a few o…

On the datasheet it says its 100hz. Response time needs to be more or less instantaneous

ullisees: On the datasheet it says its 100hz. Response time needs to be more or less instantaneous That's not the response time, that's the PWM frequency. Since this is a thermal device it may be quite slow. "more or less instantaneous" - could mean 1µs, 1ms, 1s or 100s, depending on your expe…

I'd be thinking 100ms should be fast enough response

Memsic 2125 Dual-Axis Accelerometer

Other Hardware Sensors

MarkT June 19, 2020, 10:09am 2

Low-pass filter the outputs - what bandwidth / response time are you looking for?

Topic		Replies	Views
UNO Q: ADC sampling rates > 1MHz UNO Q	4	189	March 30, 2026
PWM on Piezoelectric sensor General Guidance	52	784	March 29, 2025
Digital To Analog Pulse Signal General Guidance	5	203	October 13, 2024
Slowing down a 0-10v output General Electronics	23	787	January 31, 2024
Frequency multiplication by x1.2 Sensors	37	879	July 18, 2024

Memsic 2125 Dual-Axis Accelerometer

Related topics