Problem uploading Nano

Development Tools Uploading
1

Arduino: 1.8.9 (Windows 10), Board: "Arduino Nano, ATmega328P"

avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x3b
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x3b
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x3b
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x3b
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x3b
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x3b
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x3b
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x3b
avrdude: stk500_recv(): programmer is not responding
Problem uploading to board. See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x3b
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x3b

This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.

I have this Arduino clone Nano that I bought yesterday.
I tried 4 cables, but it all had the same problem.
The compile goes normal but the uploading screen goes for some minutes and this error comes out.

2

Select Tools > Processor > ATmega328P (Old Bootloader) and try uploading again.

3

Thanks mate! Clones.. :confused: I should buy a original one

4

You're welcome!

It is nice to buy some official Arduino products because the money from them will help support the development work on Arduino's open source software that benefits all Arduino users. It's kind of sad that Arduino updated the bootloader on the official Nano boards over 1.5 years ago, yet I have not heard of a single clone or derivative manufacturer who has done the same, even though all it would take is to use one file instead of the other, both of which they already have on hand. At least you know how to use your Nano now, so you can start having some fun with it. Enjoy!
Per