Problema subiendo a la placa

International Español Software
1

Hola que tal pues basicamente my problema es ese, no puedo subir nada a la placa, tengo un arduino uno y uno nano, lo curioso es que antes en un notebook, el uno funcionaba perfectamente sin ningun problema, lo deje de usar algunos añitos, y ahora lo retome, y ni en la laptop nueva con win10 ni en la anterior me funciona ninguna placa.

Me manda este error.

Arduino:1.8.8 (Windows 10), Tarjeta:"Arduino Nano, ATmega328P"

El Sketch usa 942 bytes (3%) del espacio de almacenamiento de programa. El máximo es 30720 bytes.
Las variables Globales usan 9 bytes (0%) de la memoria dinámica, dejando 2039 bytes para las variables locales. El máximo es 2048 bytes.
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x95
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x95
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x95
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x95
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x95
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x95
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x95
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x95
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x95
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x95
Problema subiendo a la placa. Visita http://www.arduino.cc/en/Guide/Troubleshooting#upload para sugerencias.

ya desinstale e instale otra vez, y sigue el mismo error. Que puede ser, ya me desespere.

2

I'm sorry. I don't speak Spanish or whatever. Please use Google Translate to translate back into your native language.

But please try removing and placing the chip back in. I have a similar problem.

Other things you can try, if this fails:

  • check connections
  • make sure you're not using Arduino as ISP
  • try another cable
  • try another programmer
  • use Verbose mode (ctrl+comma to enable)
    etc..

Hit me up if nothing works for you.