I purchased a 360 degree controllable servo. I'm trying to build this using a servo and Arduino, but I need help. When the Arduino receives a PWM signal and the value exceeds 2000, I want to make the servo rotate 90 degrees first, rotate 60 degrees when it receives the signal secondly, and rotate 50…

Welcome to the forum Are you sure that you can control the angle of the servo rather than just its rotation speed and direction ? What happens when you run the Servo Sweep example ?

I imagine you would need to know the time the servo receiving CW/CCW values takes to move to your preferred angle before sending the "stop" value. Discard these and use a 180 degree servo.

Yes. It's not an ordinary 360 servo. It can control degree of servo. I guess it has higher gear ratio than normal 180 servo. If I use servo Sweep, I can work with the particular angle.

The servo that I have is controllable 360 servo. I already know ordinary 360 servo can't control the angle. If I use this servo, can you suggest the method that I can make this job done?

DroneBotWorkShop show how to use RC with servos... Flysky FS-I6X with Arduino - Build an Arduino RC Car Learn two ways to use a Flysky FS-I6X transmitter & receiver with an Arduino, and put together a radio-controlled robot car! Code & Video included.

[image] ycs0512: It's not an ordinary 360 servo. It can control degree of servo. what does it do when driven with standard 1, 1.5 and 2 msec pulses ?

[image] ycs0512: It's not an ordinary 360 servo. Then what is it exactly...??

[image] bluejets: Then what is it exactly...?? It seems to be a 180 servo with 2:1gears, so "servo180.write(90)" and "servo360.write(45)" go to 90 degrees... I'm guessing. Maybe this: (do not read this link ... it was only an example of a 2:1 ratio) [image] SG12 Series Servo Gearbo…

Continuous rotation servos generally have no positioning control. In fact the link showed any control signal sent is a speed control. Apparently other modes available but who knows what the hell the Op has.

Servo control With RC Receiver

Projects Programming

jremington August 8, 2024, 2:37pm 2

Please post a link to the servo product page or data sheet.

Topic		Replies	Views
Control angle in servo motor 360 degree Motors, Mechanics, Power and CNC	7	623	November 17, 2023
Help to code servos SG-5010 and MG996R Programming	3	180	October 30, 2025
The Arduino control SERVO turning disorderly General Guidance	9	834	March 3, 2022
How to make a 360 servo do a 180 sweep? Motors, Mechanics, Power and CNC	22	1364	January 30, 2024
180 degree servo control for robot arm really urgent Programming	5	345	April 10, 2023

Servo control With RC Receiver

Related topics