Trying to use the debugger on a simple sketch, with IDE2, I get this message:
Open On-Chip Debugger 0.11.0+dev-gab95bac57-dirty (2021-05-11-10:45)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
CDRTOSConfigure
swd
adapter speed: 1000 kHz
Info : Listening on port 50001 for tcl connections
Info : Listening on port 50002 for telnet connections
Error: unable to open CMSIS-DAP device 0x2341:0x1002
Error: unable to find a matching CMSIS-DAP device
I am using Windows 11. When I look at the device drivers, I see that the board is recognized at COM3 under ports.
Now looking at "events" for the driver of that port, I get the information:
"Device SB\VID_2341&PID_1002&MI_01\6&ffad136&0&0001 requires further installation."
Searching on that error message I get:
Download USB\VID_2341 Arduino Drivers for Windows 11, 10, 8.1, 8, or 7 - 64-bit and 32-bit - Treexy
This leads to a bunch of drivers, but not PID_1002.
Can anyone help to resolve this?
that link yields a bunch of drivers, but not including PID1002