Hi to all. I'm building a code, washing machine program with Arduino Uno r3. I do not know programming, but I'm a device technician, and a technician of automation, for 20 years I have a great deal of repair and construction. this particular project I've been thinking a long time ago, I want to wri…

The explanation of the code is not correct, I slowly rectification sketch_jan22_ALEX.ino (28.9 KB)

I'd like mine to notify me when it's done. Just hook a vibration sensor to the back of machine then run that from 5v and pin 1. When the thing reads several pulses of 5v per n time duration, say a minute, from a state where no pulses counted, the state of machine is ON. After that, once pulses cease…

Thanks for the information, but downloaded the code to see what it contains. If you notice I have included DS18B20 Digital Thermometer And many more. and if you can write an example of a code from what you write to me. because only so I can understand, because I said, I know little programming.

This works normally but can anyone tell me if this is right? And if not how else we can write? for (sensors.getTempCByIndex(0); settemp > sensors.getTempCByIndex(0); ) // if the temperature exceeds your chosen settemp { digitalWrite (warmWater, 1); // turn on the heating digi…

It seems odd that every delay you use has the same amount of milliseconds selected. I'd expect it to vary according to what the machine is doing.

In this last I posted is the process of water heating. and what it does is to rotate the bucket motor right and left. and you are managing the same waiting time. elsewhere in the code, it cross more time again with the delay, with double and triple etc.

I use the Real time clock (RTC) DS1307 can someone tell me how there is to use the minutes instead of the delay. to use real time in the program flow?

I see that there is no interest, and it is disappointing things, and no cooperation. so I will not share my job. I have a great deal to show you plans for a fully brain washable. and a channel with my own integrated systems. sharing and working together is the best thing, but here I do not see it …

The plan gets flesh and bone. the electrical installation I make as simple and fast as possible, I do not want to spend much time on it. the whole project base to construct a machine brain which will adjust to all washing machines. They will replace the relay with triak, and will be on a single boar…

photos [20180205_223435.jpg] [20180205_223538.jpg]

washing machine Arduino program

Other Hardware Home Automation

alex3241 February 5, 2018, 9:34pm 12

photos

Topic		Replies	Views
Washing machine General Guidance	67	10013	November 6, 2018
Hilfe zum automatischen Bewässerungscode Deutsch	13	243	January 24, 2026
Arduino só funciona bem a primeira vez após compilação Português	28	625	April 8, 2024
Help needed to complete full automatic washing machine controller. Programming	19	9223	June 17, 2019
How to keep the arduino active even if task is done momentarily? Programming	22	584	September 23, 2022

washing machine Arduino program

Related topics