WeMos ESP8266 Mini

Hardware
1

Hi All,

New to the ESP boards, bought myself these ESP Boards for this project Display project

Followed all the install board manager and libraries, everything appear ok, IDE see's the board and even uploads to it (ESP example Blink Sketch) but it doesn't "blink"

Tried the

LOLIN(WEMOS) D1 R2 & Mini
LOLIN(WEMOS) D1 Mini (Clone)
LOLIN(WEMOS) D1 R1
LOLIN(WEMOS) D1 Mini Lite

Can't get LED to blink, LED works as I can see it flashing what I upload.

Thanks Steve

2

Try blinking the LED on pin 2 with LOLIN(WEMOS) D1 R2 & Mini as the target board

3

Sorry!!! I had already wired up the LED dot matrix display as the project showed, this must have been affecting the LED / PIN pulling it HIGH / LOW. I just removed all the wires and the basic blink is working when board "D1 R2 Mini" is selected. thanks

4

This topic was automatically closed 180 days after the last reply. New replies are no longer allowed.