Arduino nano ATmega328PB upload issue

finger crossing didn't help... strangely enough after successfully uploading a sketch on a nano I repeated the process for my other two boards and it didn't work. So either I have done something different the first time without realizing or this things are just temperamental....
the driver is now installed, I have flashed the bootloader via arduino on them but it won't upload even using the same exact settings. funny enough it wont even upload on the nano on which I previously uploaded a sketch successfully...

now I just get this:

Avrdude version 8.0-arduino.1
Copyright see https://github.com/avrdudes/avrdude/blob/main/AUTHORS

System wide configuration file is C:\Users\inhk\AppData\Local\Arduino15\packages\MiniCore\tools\avrdude\8.0-arduino.1\etc\avrdude.conf

Using port            : COM9
Using programmer      : urclock
Setting baud rate     : 115200
Error: cannot open port \\.\COM9: Access is denied.


Error: unable to open port COM9 for programmer urclock

Avrdude done.  Thank you.
Failed uploading: uploading error: exit status 1

it appears that the board is connected and the debug message (from the sketch I uploaded on it previously) is printing regularly on the serial monitor, but the IDE cannot upload a new sketch on it (and the debug message keeps on printing)