Hy, I am totally new into Arduino things. I buy couple of arduinos and those ethernet shields which would connect to internet and send some data to our API. First problem is i can't get to work my ethernet shield, all the time i don't get any ip address. All wires are connected right, check it 10 …

Your "schematic" and "code" would be very useful as without it even a crystal ball is going to have issues deciding on an answer. Also use code tags ( </> ) to post code.

find the 'add on' for the chip. Then the examples will 'come to life'. (the enc... chip is a litte trickey)

I'm using this library GitHub - njh/EtherCard: EtherCard is an IPv4 driver for the ENC28J60 chip, compatible with Arduino IDE .

Hmm getting 404 error for that link. So if all else fails a schematic of what you have hooked up and HOW ? Hand drawn will be fine too.

It's wired: SO - D12 SCK - D13 RST - RST GND - GND VCC - 3.3V CS - D10 SI - D11

I am now using this code, i get IP local in Serial monitor, but can't ping this ip from my computer. Here is my complete code with libary: Arduino Nano and Nano Ethernet Shield ENC28J60 using UIP Ethernet library

I have one of those NANO shields and just plugged it in. The only change I made was to put the IP address onto my own subnet 192.168.0.115 and it works just fine. Are you aware of networking protocols, IP ranges, Subnets, etc. If not brushing up a little may be in order as the sketch you pointed …

Can you tell me which libary are you using? As i can see you are not using Ethernet shield ENC28J60, correct?

You might want to re-do that LOL Code should come out like this. // Watch video here: https://www.youtube.com/watch?v=M4mVDnlnzSA // UIP is a proper library for Arduino Nano Ethernet shield // NOTE: UIPEthernet library is not needed if you are using Arduino UNO/Duemilanove/Mega/etc. // UIPEtherne…

Arduino Nano + Ethernet shield ENC28J60

Development Tools IDE 1.x

Ballscrewbob June 16, 2017, 9:49pm 10

I "AM" using the Ethernet shield ENC28J60.

Using the standard UIPEthernet lib.

I can change to a different ethernet shield but you were pretty clear its the ENC28J60

This one to be precise

Topic		Replies	Views
Arduino Nano + Ethernet shield ENC28J60 Networking, Protocols, and Devices	4	789	March 7, 2024
Arduino Nano (clone) + DK electronics NANO Ethernet Shield V1.0 (ENC28J60) Networking, Protocols, and Devices	6	6243	May 6, 2021
Módulo enc28j60 no funciona en red, arduino nano Español	14	228	January 23, 2025
ENC28J60 Shield and Nano Networking, Protocols, and Devices	14	605	January 3, 2025
Nano m. Ethernetshield ENCJ28J60 Deutsch	13	2416	May 6, 2021

Arduino Nano + Ethernet shield ENC28J60

Related topics