arduino uno as isp program

How can I program dataflash AT45DB041B using isp?

How can I program dataflash AT45DB041B using isp?

Was this a storage question?

I don't understand how i use avrdude for programming dataflash. Where i can find examples?

The first problem...

4M bit, 2.5 or 2.7-Volt Serial-Interface Flash with Two 264-Byte SRAM Buffers

The second problem is that the commands (opcodes) supported by the AT45DB041B are not the same commands used during serial programming. ArduinoISP is not the right tool.