Arduino UNO with ADS1293EVM

[ajay_rathor028]

Hi,

We are trying to read data from SPI pins of ADS1293EVM using Arduino code but unable to read any data.
We had taken reference from : GitHub - Protocentral/protocentral-ads1293-arduino

we have disconnected the on board MSP430 and Powered Board by USB.
Pin connections of Arduino UNO are:
DRDYB 2
SDO 12 (slave out - master in )
SDI 11 (slave in - master out)
SCLK 13
CSB 10

Can you please guide how can i read the data through SPI pin.

[pert]

I moved your topic to an appropriate forum category @ajay_rathor028.

In the future, please take some time to pick the forum category that best suits the subject of your topic. There is an "About the _____ category" topic at the top of each category that explains its purpose.

This is an important part of responsible forum usage, as explained in the "How to get the best out of this forum" guide. The guide contains a lot of other useful information. Please read it.

Thanks in advance for your cooperation.

[xfpd]

@ajay_rathor028

guide

@GolamMostafa

ADS1293EVM spi interface with Arduino Uno

Hello, I would like to ask you about the code for SPI interface with ADS1293. My goal is to acquire ECG data with ADS1293 and after that send them through SPI to Arduino Uno. However, the only thing I can see in serial plotter is a flat line. I just stuck on this. I would be grateful for your advice and opinions. Thank you, Daniel #include <SPI.h> /* pin 6  = DRDYB    (input) pin 10 = CSB      (output) pin 11 = SDI/MOSI  (output) pin 12 = SDO/MISO  (input) pin 13 = SCLK      (output) */ …