Arduino USB to Serial Board - Silkscreen Error?

Community Products and Services
1

Hi,

With reference to this product:

Can anyone confirm that the silkscreen ledgend marking pin 1 of the ISP connector is wrong?
Please see attached image. The pin 1 dot (red arrow) is at 10 o'clock. I think it should be at 2 o'clock (green arrow)?

Regards, Martin

usb2serial.jpg

2

If the pin next to the fuse is power (lower right), that is pin 2, pin 1 is upper right (green arrow) if it uses standard ICSP pinout:
MISO 1 2 Vcc
SCK 3 4 MOSI
Reset 5 6 Gnd

3

See the schematics here

4

Hi,

It looks Like we were right - not that it matters now!

From: [mailto:support@arduino.cc]
Sent: 22 January 2016 13:37
To: xxxxxxx, Paul
Cc: Longhin, Roberto
Subject: RE: A000107 Arduino USB to Serial 2 USB micro connector

Hi,

I've checked and think that you are right.
I have to inform you that we (Arduino.cc/Genuino.cc) have discontinued the USB-to-Serial product.

Best regards,

Regards, Martin